1) cyclic hardening(softening)
循环硬(软)化
2) cyclic hardening and softening
循环硬化与软化
3) cyclic hardening/softening
循环硬化/软化
4) cyclic soft/hard behavior
循环硬化软化
5) Cyclic Hardening
循环硬化
1.
Implicit stress integration and finite element implementation of constitutive model for cyclic hardening materials;
循环硬化材料本构模型的隐式应力积分和有限元实现
2.
The results show that the aluminum alloy shows cyclic hardening both under multi-axial proportional and non-proportional loadings,while the cyclic additional hardening is shown under non-proportional loading,but the level is low.
结果表明:合金在两种加载方式下均表现为循环硬化;在非比例载荷下合金表现出附加强化,但程度不明显;合金的疲劳寿命随等效应变幅的增加而降低,合金在非比例加载下的疲劳寿命低于比例加载时的疲劳寿命。
3.
The cyclic hardening ability .
结果表明:4种合金均表现为明显的循环硬化行为;具有较高钛含量的E14、M14合金的循环硬化能力高于低钛含量的E10和M10合金;合金的塑性应变能密度受应变幅的影响且具有循环相关性;高应变幅时,塑性应变能较高但随循环周次变化较小;当应变幅较低时,合金的塑性应变能较小但变化较大,特别是塑性较好的E10和M10合金;无论是电解加钛还是熔配加钛,钛含量为0。
6) cyclic softening
循环软化
1.
New description on cyclic hardening or cyclic softening behavior in low cycle fatigue;
材料低周疲劳中循环强化或循环软化的新描述
2.
Based on Wang-Lou's model,a method of continuous damage mechanics is used to get the low cycle fatigue damage model of polymers under triaxiality stresses with the consideration of the cyclic softening of polymer.
采用连续损伤力学方法,在著名的王-楼模型的基础上,充分考虑了高分子材料的循环软化特性,得到了高分子材料三轴应力场中的低周疲劳损伤模型。
3.
The cyclic softening/hardening features of the material were analyzed under symmetrical cyclic strain too.
对调质42CrMo钢进行室温下各种应力循环和对称应变循环的低周疲劳实验,揭示材料的循环软化特性,棘轮变形和低周疲劳特性以及棘轮-疲劳交互作用。
补充资料：怕硬欺软
1.害怕强硬的，欺负软弱的。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条