1) Cyclic Strain Harding
循环应变硬化
2) Cyclic Hardening
循环硬化
1.
Implicit stress integration and finite element implementation of constitutive model for cyclic hardening materials;
循环硬化材料本构模型的隐式应力积分和有限元实现
2.
The results show that the aluminum alloy shows cyclic hardening both under multi-axial proportional and non-proportional loadings,while the cyclic additional hardening is shown under non-proportional loading,but the level is low.
结果表明:合金在两种加载方式下均表现为循环硬化;在非比例载荷下合金表现出附加强化,但程度不明显;合金的疲劳寿命随等效应变幅的增加而降低,合金在非比例加载下的疲劳寿命低于比例加载时的疲劳寿命。
3.
The cyclic hardening ability .
结果表明:4种合金均表现为明显的循环硬化行为;具有较高钛含量的E14、M14合金的循环硬化能力高于低钛含量的E10和M10合金;合金的塑性应变能密度受应变幅的影响且具有循环相关性;高应变幅时,塑性应变能较高但随循环周次变化较小;当应变幅较低时,合金的塑性应变能较小但变化较大,特别是塑性较好的E10和M10合金;无论是电解加钛还是熔配加钛,钛含量为0。
4) strain cycling
应变循环
1.
Uniaxial strain cycling test was carried out on 40Cr and 16Mn steels at room temperature and the cyclic characteristics of the two steel were compared.
对40Cr钢和16Mn钢进行了室温单轴应变循环试验,对比了两种钢的循环特性,讨论了应变幅值和平均应变以及二者的历史对应变循环特性的影响。
5) cyclic hardening(softening)
循环硬(软)化
6) cyclic wetting-drying
循环变化
1.
Effect of shear strength variation on shakedown safety of slopes due to cyclic wetting-drying;
抗剪强度随干湿循环变化对边坡安定性的影响
补充资料:循环
循环
①顺着环形的轨道旋转,比喻事物周而复始的运动。②物理学名词。物质系统从某一状态经过一系列变化回到初始状态的过程。③医学上指血液和淋巴液在循环系统的流动过程。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条