1) Lubrication carrier
润滑载体
2) lubricant carrier
润滑剂载体
3) lubricity carriers
润滑性质载体
4) solid lubrication
固体润滑
1.
Application study on solid lubrication in a dry scroll vacuum pump;
涡旋真空泵中固体润滑技术的应用研究
2.
The nickel-based solid lubrication coatings containing nickel coated graphite were produced on the 45 steel substrate by high velocity oxygen fuel spraying.
用超音速火焰喷涂在45钢表面制备具有Ni包石墨的镍基固体润滑涂层。
3.
Four types of solid lubrication coatings containing MoS_2 were sprayed on the steel substrate by high velocity oxygen fuel(HVOF) spraying.
采用超音速火焰(HVOF)喷涂的方法在45钢表面制备四种含有MoS2的镍基固体润滑涂层,并研究了MoS2含量对涂层组织和性能的影响。
5) hydrodynamic lubrication
流体润滑
1.
A testing machine is developed to observe dynamically the formation of dynamic film and chemical film in the process of hydrodynamic lubrication.
流体润滑动态观测试验机适用于流体润滑中动力油膜、化学油膜形成的动态观测。
2.
The hydrodynamic lubrication characteristics be- tween the wafer and pad are shown to illustrate that circular-translational-grinding facilitates increasing ma- terial removal rate.
试件与研磨盘间的流体润滑特性表明,圆平动平面研磨有利于提高表面质量和材料去除率。
6) solid lubricating
固体润滑
1.
Compared with TiN/40CrNiMo, the hardness and solid lubricating effects for TiN/GT35 were more significant.
同TiN/40CrNiMo相比,TiN/GT35的硬度高和固体润滑效果显著,GT35是较为理想的基体材料。
2.
The surface of the copperized carbon fiber was analyzed by scanning electron microscopy(SEM)and X-ray diffraction(XRD),the friction and wear properties were studied by adding the prepared copperized carbon fiber to PTFE to form solid lubricating composite materials.
在镀铜碳纤维中加入PTFE制备固体润滑复合材料,并进行摩擦磨损实验。
补充资料：润滑载体
润滑载体
lubricant carrier
rUnhUO zQ一tl润滑载体(lubrieant。arrier)用物理或化学方法涂覆在被拉拔材料(线丝、管、棒)表面上的涂层(润滑底层)。润滑载体用来在拉拔时运载润滑剂进入变形区以提高润滑效果。又称润滑涂层。润滑涂层应具有下列性能:(l)与钢基具有一定的结合强度，在拉拔过程中不会破坏或被刮掉;(2)具有一定的抗热性，不致被高速拉拔所引起的温升所破坏;(3)具有足够的塑性，拉拔时能随同被拉拔材料一起延伸而始终覆盖在其表面上;(4)易于吸附润滑剂;(5)用于半成品的润滑涂层，能在热处理时易于清除;(6)有防锈能力但无其他有害影响;(7)对被拉拔材料表面残留酸液有中租作用。按润滑涂层的性质及生成方法，钢丝生产中的主要涂层见表。 润滑涂层的性质及生成方法 厂石灰涂层 「卡排裕万<翻砂涂层 l气水玻璃涂层 _非金属l 「涂层S l}r黄(锈)化涂层 。.!气方法涂砚梢磷酸盐涂层 涂层、l l气草酸盐涂层 }广铅铰层 眨鑫詹之紫铜、青铜、黄铜涂层 贬锌镀层 (韩观昌)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条