1) lubricating crystal
润滑晶体
1.
Preparation and quantum size effect of nano WS_2 lubricating crystal;
纳米WS_2润滑晶体的制备与量子尺寸效应
2) solid lubrication
固体润滑
1.
Application study on solid lubrication in a dry scroll vacuum pump;
涡旋真空泵中固体润滑技术的应用研究
2.
The nickel-based solid lubrication coatings containing nickel coated graphite were produced on the 45 steel substrate by high velocity oxygen fuel spraying.
用超音速火焰喷涂在45钢表面制备具有Ni包石墨的镍基固体润滑涂层。
3.
Four types of solid lubrication coatings containing MoS_2 were sprayed on the steel substrate by high velocity oxygen fuel(HVOF) spraying.
采用超音速火焰(HVOF)喷涂的方法在45钢表面制备四种含有MoS2的镍基固体润滑涂层,并研究了MoS2含量对涂层组织和性能的影响。
3) hydrodynamic lubrication
流体润滑
1.
A testing machine is developed to observe dynamically the formation of dynamic film and chemical film in the process of hydrodynamic lubrication.
流体润滑动态观测试验机适用于流体润滑中动力油膜、化学油膜形成的动态观测。
2.
The hydrodynamic lubrication characteristics be- tween the wafer and pad are shown to illustrate that circular-translational-grinding facilitates increasing ma- terial removal rate.
试件与研磨盘间的流体润滑特性表明,圆平动平面研磨有利于提高表面质量和材料去除率。
4) solid lubricating
固体润滑
1.
Compared with TiN/40CrNiMo, the hardness and solid lubricating effects for TiN/GT35 were more significant.
同TiN/40CrNiMo相比,TiN/GT35的硬度高和固体润滑效果显著,GT35是较为理想的基体材料。
2.
The surface of the copperized carbon fiber was analyzed by scanning electron microscopy(SEM)and X-ray diffraction(XRD),the friction and wear properties were studied by adding the prepared copperized carbon fiber to PTFE to form solid lubricating composite materials.
在镀铜碳纤维中加入PTFE制备固体润滑复合材料,并进行摩擦磨损实验。
5) solid lubricant
固体润滑
1.
Phosphate treatment has a great influence on bonded solid lubricant coating.
把氧化锌、磷酸、水按照不同比例配成磷化液,对金属表面进行不同参数(温度、时间)的磷化处理,并在其表面煮涂MoS2利用M-2摩擦磨损实验机测定不同磷化工艺下的MoS2涂层的磨擦学性能,确定了使MoS2固体润滑涂层摩擦性能达到最佳的磷化工艺参数,并讨论了磷化膜表面粗糙度对固体润滑涂层摩擦学性能的影响。
2.
Rheological behavior of a thermal resistant bismaleimide resin for solid lubricant composite was studied.
研究了一种可用于固体润滑的耐高温双马来酰亚胺树脂的流变特性,并根据双阿罗尼乌斯方程,建立了与实验数据较为相符的化学流变模型,同时对树脂粘度进行了预测。
3.
For the analysis technology of the contact problem for the friction pair with solid lubricant,the traditional differential method need to deal with the border iterative,and the computational process is time-consuming and difficult to balance.
固体润滑摩擦副接触问题数值分析的传统的微分法涉及边界迭代,计算过程冗长且不易收敛。
补充资料：极压润滑剂极压润滑
分子式：
CAS号：
性质： 具有防止滑动面破坏的各种润滑剂称为极压润滑剂。极压润滑剂一般都含有极压添加剂。极压齿轮油、极压润滑脂、切削油、轧钢油等都含有极压润滑剂。这种润滑剂用于处在重载(或高接触应力)、高速、高温下滑动摩擦表面的润滑称为极压润滑。极压润滑通常是通过极压添加剂与金属表面生成极压膜将两摩擦表面隔开，以降低摩擦系数、减缓磨损，达到润滑的目的。
CAS号：
性质： 具有防止滑动面破坏的各种润滑剂称为极压润滑剂。极压润滑剂一般都含有极压添加剂。极压齿轮油、极压润滑脂、切削油、轧钢油等都含有极压润滑剂。这种润滑剂用于处在重载(或高接触应力)、高速、高温下滑动摩擦表面的润滑称为极压润滑。极压润滑通常是通过极压添加剂与金属表面生成极压膜将两摩擦表面隔开，以降低摩擦系数、减缓磨损，达到润滑的目的。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条