1) Closed extrusion-die forging
闭式挤锻
2) closed cold forging
闭式冷挤锻
3) closed extrusion-forging
闭式挤锻工艺
1.
The technological characteristic of the closed extrusion-forging forming is narrated.
结果表明,闭式挤锻工艺的新方法是十分有效的。
4) closed-die forging
闭式模锻
1.
Based on the analyses,traditional open forging process is changed,and closed-die forging with closed-flash process for the preforging is proposed.
在此基础上,对此类锻件传统的锻造工艺进行了改进,将预锻工序由开式模锻改进为封闭飞边闭式模锻。
2.
Adopting 3D finite element simulation software DEF0RM-3D, the simulation is employed to examine the closed-die forging process in bevel gear.
采用有限元数值模拟软件DEFORM-3D对螺旋齿轮的闭式模锻工艺进行了数值模拟分析,选择了温度、摩擦因子、模数、螺旋角、锥角等参数,进行了多次模拟,得到成形过程中的等效应力、应变分布图以及载荷—行程曲线图。
5) flashless forging
闭式模锻
1.
The CAPP system for flashless forging of gear blanks is described in this paper, which takes VBA as objected-oriented development tool and AutoCAD2002 as drawing platform.
在AutoCAD2000图形处理平台下,用面向对象开发工具VBA研发了齿轮坯闭式模锻CAPP系统。
2.
Developed on the basis of Windows, the flashless forging CAPP system for gear blanks takes AutoCAD 2002 as pattern supporting software, and VBA embedded in AutoCAD 2002 as secondary developing tool.
齿轮坯闭式模锻CAPP系统软件是在Windows平台下,以AutoCAD2002为图形支撑软件,以其内嵌的VBA语言作为二次开发工具开发而成的。
3.
The CAPP system for flashless forging of gear blanks is a computer aided forging process and die design software which is developed for a company, AutoCAD is used as drawing platform and VBA as visual developing tool.
齿轮坯闭式模锻CAPP系统是为某齿轮锻造公司开发的计算机辅助齿轮锻造工艺和模具设计软件。
6) flashless die forging
闭式模锻
1.
The development method and the key technology of parameterized design system for flashless die forging drawings of gear blanks have been described.
以AutoCAD2000为图形支撑软件,以其内嵌的VBA语言作为二次开发工具,开发出齿轮坯闭式模锻件图参数化设计系统。
2.
Based on AutoCAD ActiveX technology,the characteristic of object-oriented programming of VBA has been expounded,then some detailed applications of VBA in flashless die forging CAPP system for gear blanks have been illustrated.
列举了VBA在齿轮坯闭式模锻CAPP系统中的一些具体应用。
3.
Using the feature technique,a set of flashless die forging CAPP system for gear blanks is developed.
运用特征技术 ,开发了一套齿轮坯的闭式模锻 CAPP系统。
补充资料：整体锻焊式高压容器
分子式：
CAS号：
性质：这是用整体锻造炮筒的技术来制造的高压容器，筒体与法兰可整锻而出或用螺纹连接。锻造容器的质量较好，特别适合于焊接性能较差的高强钢所制造的超高压容器。锻造式高压容器一般直径为φ300～φ800，长度不超过12m。在锻造的筒节上也可采用焊接的方法将筒节与筒节、筒节与端部法兰或底部连接起来而组成的容器为锻焊式容器。
CAS号：
性质：这是用整体锻造炮筒的技术来制造的高压容器，筒体与法兰可整锻而出或用螺纹连接。锻造容器的质量较好，特别适合于焊接性能较差的高强钢所制造的超高压容器。锻造式高压容器一般直径为φ300～φ800，长度不超过12m。在锻造的筒节上也可采用焊接的方法将筒节与筒节、筒节与端部法兰或底部连接起来而组成的容器为锻焊式容器。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条