1) large steel ingot
大钢锭
1.
Aided by its powerful preprocessing and postprocessing capabilities, the FEM program can readily be used to predict the temperature distribution and the porosity and shrinkage cavity formation during salidification of large steel ingots.
本文论述了大钢锭凝固传热过程的数学模型,并开发出一套专用的有限元模拟程序。
3) Heavy Hollow Ingot
大型空心钢锭
4) Ingot Type
钢锭锭型
1.
Influence of Ingot Type on Carbide Nonuniformity in High Speed Steel Product;
钢锭锭型对高速钢碳化物不均匀度的影响
5) steel ingot
钢锭
1.
Study on phase transformation of 16MnCr5 steel ingot during consolidating and cooling;
16MnCr5钢锭表层凝固及冷却过程中组织转变规律研究
2.
The vertical directional solidification process of steel ingot was simulated considering the ingot structure and casting material properties, the initial condition and boundary conditions and natural convection of liquid metal and solute diffusion during solidification.
利用数值模拟技术,对一个采用垂直定向凝固工艺的钢锭进行了铸造过程模拟分析,考虑了材料参数和边界条件的非线性特征,以及凝固过程中液态金属的自然对流和溶质扩散,预测了钢锭各部位的凝固时间和硫元素宏观通道偏析的位置和偏析程度,模拟结果与相关文献的实验结果基本一致。
3.
Based on analyzing the iron sheet's structure and component during steel ingot heating, it is found that the influence of steel ingot oxidizing to the ratio of air to fuel and it is calculated that compensate coefficient the ratio of air to fuel.
通过对钢锭加热生成的氧化铁皮的结构和成分的分析,找出钢锭氧化对空燃比的影响,并推导计算出空燃比的修正系数,对提高燃烧控制的水平具有重要意义。
6) ingot
[英]['ɪŋɡət] [美]['ɪŋgət]
钢锭
1.
The influence of casting temperature and velocity on the slag deposition of ingot head;
注温和注速对钢锭头部积渣的影响
2.
Phase transformation of chill layer of low carbon steel ingot and its effect on hot charging crack;
低碳钢钢锭急冷层的相变及其对红送裂纹的影响
3.
The formation mechanism on hot charging process crack of low carbon steel ingot;
低碳钢钢锭红送裂纹形成机理
补充资料：上小下大沸腾钢钢锭(车铸)脱模作业(包钢)
上小下大沸腾钢钢锭(车铸)脱模作业(包钢)
上小下大沸腾钢钢锭(车铸)脱模作业(包钢)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条