1) shot blast texturing
喷丸毛化
2) shot peening
喷丸强化
1.
Experimentation of residual stresses of gear strengthened by shot peening;
喷丸强化齿轮残余应力的实验研究
2.
A review of development in shot peening Titanium alloys;
Ti合金喷丸强化研究进展
3.
Effect of shot peening on fatigue performance of nitrided 40Cr and 30CrMo steels;
喷丸强化对渗氮40Cr和30CrMo钢疲劳性能的影响
3) Shot-peening
喷丸强化
1.
The effect of shot-peening strengthened NiCoCrAlY bonding coat on the resistance to isothermal oxidation of the thermal barrier coating was investigated.
研究了 Ni Co Cr Al Y粘结层表面的喷丸强化处理对热障涂层的抗氧化性能的影响 ,利用 MTS测试了经等温氧化不同时间后的热障涂层内部的结合强度 ,并采用 SEM和XRD观察和分析了涂层的界面结合以及相组成。
2.
The shot-peening and the fatigue tests of 40Cr, 20Cr and 30CrMo steels are conducted.
对几种钢材进行了喷丸强化,疲劳试验,测定了残余应力场和表面粗糙度。
3.
Composite Technics of Shot-peening and Brush-plating for Renovating Gears on Helicopter;
分析了直升机主减速器齿轮电刷镀修复后产生裂纹的成因,通过试验提出了喷丸强化改进措施。
4) shot peening strengthening
喷丸强化
1.
The microstructures of shot peening strengthening layer on Titaniun were studied by optical microscopy (OM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM).
利用光学显微分析(OM)、扫描电子显微分析(SEM)及透射电子显微分析(TEM)对喷丸强化工业纯钛表层组织特征进行了研究。
2.
It carries on using the computer simulation technology to the chassis steel structure shot peening strengthening process the movement simulation, through shot peening the stress, the strain field which the pill craft caused carries on the value simulation, the utilization limited unit law to the projectile hit rear spring material surface stress, the strain distribution has carrie.
本课题从车体钢结构亟需提高其使用寿命的实际需求出发,运用计算机仿真技术对车体钢结构进行喷丸强化过程的运动仿真,通过喷丸工艺引起的应力、应变场进行数值模拟,运用有限单元法对弹丸撞击后钢板材料表面应力、应变的分布进行了数值计算和统计分析。
3.
The surface layer of shot peening strengthening was analyzed with OM,SEM and TEM.
研究了喷丸强化对TC4-DT钛合金材料组织的强化效果;采用金相显微镜、扫描电镜和透射电镜分析材料喷丸强化层。
5) Shotpeening hardening
喷丸硬化
6) shot peening
强化喷丸
1.
The material,heat treatment,shot peening,roughness and assembly technology etc.
分析影响薄壁主动齿轮性能的主要因素,提出提高薄壁主动齿轮性能的制造工艺方案,即严格卡控关键制造工序,从原材料、热处理、强化喷丸、提高齿根粗糙度和降低组装过盈量等方面来提高齿轮的疲劳强度和运行寿命。
补充资料：毛丸
1.古代蹋戏用具。也称丸毛﹐又称踘﹑鞠﹑球。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条