1) PP-g-M AH
聚丙烯接枝马来酸酐共聚物
2) chlorinated polypropylene grafted maleic anhydride copolymer
氯化聚丙烯-马来酸酐接枝共聚物
3) Fusabond
马来酸酐接枝的乙烯-丙烯酸酯共聚物
4) PP-g-MAH
马来酸酐接枝聚丙烯
1.
To improve the interfacial compatibility between wood fiber and polypropylene as well as the toughness of wood fiber-polypropylene composites,maleic anhydride grafted polypropylene(PP-g-MAH) and maleic anhydride grafted styrene-ethylene-butadiene-styrene copolymer(SEBS-g-MAH) were used as modifiers.
为了改善木纤维与聚丙烯之间的界面相容性,提高木塑复合材的刚度和韧性,该文利用马来酸酐接枝聚丙烯(PP-g-MAH)及马来酸酐接枝苯乙烯-乙烯-丁二烯-苯乙烯嵌段共聚物(SEBS-g-MAH)对其进行增强和增韧改性。
2.
PA6/PP alloy was prepared using PP-g-MAH as compatilizer, and the effects of varied content of PP-g-MAH and PA6/PP ratio on alloy properties were studied.
以马来酸酐接枝聚丙烯(PP-g-MAH)为增容剂,制备了PA6/PP合金,研究了PA6/PP配比及PP-g-MAH用量对PA6/PP合金性能的影响。
3.
PP-g-MAH/down powder blend films with different content of powder were obtained after down powder were pretreated by different kinds of plasticizers,and the influence of down powder content,the type of PP,and the kind of plasticizers on the mechanical properties of blend films were studied.
采用不同增塑剂对羽绒粉体处理,制备了不同羽绒含量的马来酸酐接枝聚丙烯(PP-g-MAH)/羽绒粉体共混膜,分析了粉体含量、PP种类及不同增塑剂对共混膜力学性能的影响。
5) maleic anhydride grafted polypropylene
马来酸酐接枝聚丙烯
1.
Influence of maleic anhydride grafted polypropylene on shear strength of adhesion bonded aluminum sheet/polypropylene/aluminum sheet;
马来酸酐接枝聚丙烯对铝薄板/聚丙烯界面粘接强度的影响
2.
Polypropylene (PP)/woodflour (WF) composites (WPC) was taken as research object to study the effects of content of woodflour and maleic anhydride grafted polypropylene (PP-g-MAH) on thermal properties of WPCs.
以聚丙烯(PP)/木粉(WF)复合材料(WPC)为对象,研究了WF及马来酸酐接枝聚丙烯(PP-g-MAH)含量对WPC热性能的影响。
3.
Wood powder converted into thermoplastic wood(TPW) though benzylated with phase transfer catalysis(PTC),which extruded and mixed into TPW/MAH-PP/Mica composite with maleic anhydride grafted polypropylene(MAH-PP) and Mica.
通过苄基化法在相转移催化剂(PTC)的作用下可将木粉制备成热塑化木材(TPW),然后将热塑化木材、马来酸酐接枝聚丙烯按一定比例配料后,再分别与不同质量的云母共混挤出,制备成热塑化木材/马来酸酐接枝聚丙烯/云母复合材料(TPW/MAH-PP/Mi-ca)。
6) PP-g-MAH
聚丙烯接枝马来酸酐
1.
Effect of PP-g-MAH on Mechanical Properties of PP/Attapulgite Composites;
聚丙烯接枝马来酸酐对聚丙烯/凹凸棒石复合体系力学性能的影响
2.
The compatibilization effect of PP-g-MAH on PP/PA6 blend was studied, and its effect on the mechanical properties of the blend was discussed.
研究聚丙烯接枝马来酸酐相容剂对聚丙烯／尼龙6体系的增容作用;并讨论了PP-g-MAH对PP／PA6共混物的力学性能的影响。
补充资料：氯乙烯和乙烯僧酸乙烯共聚物接枝共聚物
分子式：
CAS号：
性质：为在乙烯/醋酸乙烯共聚物(EVA)之大分子链上进行氯乙烯接枝共聚后得到之产品，按EVA中醋酸乙烯含量不同和接枝共聚物中EVA含量不同以及分子量大小，分为冲击改性剂用、硬质和软质品用三类。作冲击改性剂用和软质品用者多为EVA中VAC含量45％，EVA含量为50％。主要用于防水卷材、医用制品、电缆、记录材料和与PVC共混后作门窗型材。硬质品用者为EVA中VAC含量为15％，EVA含量5％～10％。除接枝物外含聚氯乙烯均聚物。可直接用作门窗型材和管材，冲击强度比一般PVC可提高4倍以上，将EVA溶于或分散于氯乙烯单体中进行悬浮聚合制得。
CAS号：
性质：为在乙烯/醋酸乙烯共聚物(EVA)之大分子链上进行氯乙烯接枝共聚后得到之产品，按EVA中醋酸乙烯含量不同和接枝共聚物中EVA含量不同以及分子量大小，分为冲击改性剂用、硬质和软质品用三类。作冲击改性剂用和软质品用者多为EVA中VAC含量45％，EVA含量为50％。主要用于防水卷材、医用制品、电缆、记录材料和与PVC共混后作门窗型材。硬质品用者为EVA中VAC含量为15％，EVA含量5％～10％。除接枝物外含聚氯乙烯均聚物。可直接用作门窗型材和管材，冲击强度比一般PVC可提高4倍以上，将EVA溶于或分散于氯乙烯单体中进行悬浮聚合制得。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条