1) voltage sensitive resistor
压敏电阴
2) thermistor mount
热敏电阴座
3) varistor voltage
压敏电压
1.
5% ,the grain size will be enlarged and the varistor voltage V1 mA will be decreased with little change of nonlinear coefficient a.
结果表明:TiO2的掺入能显著促进晶粒生长,降低压敏电压V1mA,但掺入量超过一定值后一方面会生成阻止晶粒继续生长的晶界反应层,促使压敏电压又有所升高,另一方面会生成钛酸铋立方相而引起富铋晶界相含量的减少,导致非线性特性下降。
2.
1％ (in mole content), the nonlinearity and the varistor voltage V_(1mA) will be increased.
1％能提高ZnO压敏陶瓷的非线性和压敏电压;但当其添加量大于0。
3.
54 and varistor voltage of 20.
经200℃退火热处理后,多层ZnO薄膜的非线性系数达到61·54,压敏电压20·10V。
4) breakdown voltage
压敏电压
1.
The result showed that burying sintering process may make breakdown voltage smaller and apparen.
结果表明,采取粉料埋烧可以明显降低压敏电压、提高介电常数。
2.
The results show that the sample doped with Ta2O5 exhibits the lowest breakdown voltage(E10mA = 5.
结果发现,Ta2O5掺杂的样品具有最低的压敏电压(E10mA=5。
3.
Based on the results of measurements of resistance-frequency,electric capacity-frequency and electric current-voltage,The electrical properties such as breakdown voltage,electric capacity and the semi-conductivity of the samples were investigated.
3时,压敏电压最低(E10mA为8V。
5) cathode voltage
阴极电压
1.
The process and mechanism of ion nitriding with pure nitrogen were studied by way of continuous nitrogen supply simultaneously with vacuum pumping and furnace shutdown after intermittent nitrogen supply,respectively,under cathode voltage of 500,600,650 and 700 V.
分别研究了在500、600、650和700 V阴极电压条件下采用连续供气抽真空和间歇供氮闭炉的方式进行纯氮离子渗氮的工艺及机理。
2.
In this paper,the effects of the cathode voltage V_f,the first grid-voltage V_(G1),and the repulsion voltage V_P etc.
讨论了充氩夫兰克-赫兹管中阴极电压Vf、第一栅极电压VG1和拒斥电压VP等因素对夫兰克-赫兹实验IP-VG2曲线的影响,确定了Ar原子夫兰克-赫兹实验的最佳工作参量。
6) varistor
[və'ristə]
压敏电阻
1.
Progress in study on nonlinear electrical transporting theory of varistor;
压敏电阻非线性电输运理论研究进展
2.
Effect of nano-sized TiO_2 doping on ZnO varistor;
纳米TiO_对ZnO压敏电阻的影响
3.
Preparation of doped ZnO nano-powders and ZnO varistors by different methods;
不同方法合成掺杂ZnO粉体制备ZnO压敏电阻
补充资料：表面防护用压敏胶带
分子式：
CAS号：
性质：用于家具、窗框、板状玻璃、金属材料的表面保护，防止金属材料生锈，在生产工艺过程和运输中受冲击而划伤。使用的基材有塑料薄膜和纸等。胶液主要有丙烯酸酯压敏胶和橡胶型压敏胶两种。
CAS号：
性质：用于家具、窗框、板状玻璃、金属材料的表面保护，防止金属材料生锈，在生产工艺过程和运输中受冲击而划伤。使用的基材有塑料薄膜和纸等。胶液主要有丙烯酸酯压敏胶和橡胶型压敏胶两种。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条