1) coke-combustion rate
烧炭速率
1.
A set of data,such as instantal1eous coke-combustion rates,H/Cratio of cake and coke content,can be obtained in a single operation by this method.
对逐点取样分析烧炭尾气组成的程序升温氧化技术进行了探讨，并将其应用于积炭沸石催化剂的恒温和程序升温氧化烧炭与通常的连续的程序升温氧化比较，本法可由一次试验同时获取烧炭速率、Ｈ／Ｃ比、积炭量等较全面的数据，准确判断烧炭起止温度（时间），避免通常方法因色谱基线飘移所引起误差。
2) charring ablation rate
炭化烧蚀率
1.
The ablation experiment of silicon rubber insulator was carried out in gas environment and two-phase environment with Al2O3,and the influence of gas speed on charring ablation rate,carbon layer structure characteristics and the distribution regularity of main ingredient of the carbon layer was analyzed.
在气相燃气环境、含Al2O3两相燃气环境中,对硅橡胶绝热材料开展了烧蚀试验研究,分析了不同燃气环境下燃气流速对材料的炭化烧蚀率、炭化层结构特征及炭化层成分分布的影响。
3) burning rate
燃烧速率
1.
Experimental study of burning rate behaviour in confined and ventilated fire compartments;
在受限和通风防火分区内对燃烧速率特性的试验研究(英文)
2.
The effects of water bath on the burning rate of methanol pool fire
水浴保护对甲醇池火燃烧速率的影响
3.
A simple expression to caculate the burning rate of char particles in the furnace
炉膛内煤焦颗粒燃烧速率的简易求法
4) combustion rate
燃烧速率
1.
The experimental data show that the combustion rate and flame size in Lhasa are lower than those in Hefei.
实验结果表明,在相同尺寸油盘的燃烧速率、火焰宽度以及火焰体积下,拉萨的实验值比合肥小;相同燃烧速率油盘火对环境的热辐射通量,拉萨比合肥的实验值低,但是拉萨的火焰以及热烟气温度比合肥的高。
5) ablation rate
烧蚀速率
1.
Some calculations and analysis for three examples under different ablation rates were demonstrated.
针对金属表面的烧蚀过程,采用一维传热模型,将物体内的传热、温度变化分为2个阶段,即物体被加热到熔点温度的阶段及物体开始烧蚀阶段,使用积分近似的分析方法,完整地建立了表面烧蚀速率与表面加热功率之间的近似计算关系式。
2.
The effects of the respective content of silica aerogel and boron-phenolic resin on the properties of EPDM/NBR flexible insulation material,such as tensile strength,elongation-to-break,mass ablation rate,linear ablation rate and relative density were analyzed and compared.
通过比较分析白炭黑与硼酚醛树脂用量对EPDM/NBR柔性绝热层材料拉伸强度、断裂伸长率、质量烧蚀速率和线烧蚀速率以及相对密度的影响,得出随着白炭黑或硼酚醛树脂用量的增加,柔性绝热层材料的拉伸强度和相对密度呈递增趋势,烧蚀速率呈递减趋势,断裂伸长率在白炭黑和FB用量各自为20份时有极大值。
6) coke-burning rate
烧焦速率
补充资料：烧炭
1.将树木枝干烧制为炭。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条