1) Pitch error
齿距误差
1.
Applying TCA(Tooth Contact Analysis)and LTCA (Loaded Tooth Contact Analysis) techniques,the influence of pitch error on the meshing behavior of aviation spiral bevel gears with contact ratio 2 0 was studied.
0的航空弧齿锥齿轮的齿距误差的影响进行了研究。
2) total error of tooth spacing
齿距总误差
3) pitch errors / screw threads
齿距误差/螺纹
4) accumulative pitch error
齿距累积误差
1.
The influence of spindle rotational speed and radial speed on the accumulative pitch error was analyzed and its result was experimentally verified.
按照滚压成形前后工件(花键)体积不变的原则给出毛坯直径的计算公式;根据分齿阶段花键毛坯与滚压轮作等线速纯滚动的运动特征,推导保证正确分齿要求的滚压轮齿顶圆直径公式;根据滚压时的受力分析,给出旋转条件及滚压轮的齿数条件;分析主轴转速及径向速度对分齿时齿距累积误差的影响。
5) profile error
齿形误差
1.
Research on Coordinate Method for Measuring the Profile Error of Wormgears;
坐标法测量蜗轮齿形误差的研究
2.
Measuring the Profile Error of the Involute Gear;
齿轮渐开线齿形误差的测量
3.
The tooth profile error and longitudinal form error are calculated,and the change rule with setting angle of them is got.
针对花键的齿形误差和齿向误差,按照误差计算原理,得出了计算结果及其随安装角改变的变化规律。
6) longitudinal form error
齿向误差
1.
The tooth profile error and longitudinal form error are calculated,and the change rule with setting angle of them is got.
针对花键的齿形误差和齿向误差,按照误差计算原理,得出了计算结果及其随安装角改变的变化规律。
2.
The features of involute gear profile are mapping analyzed, the principle and method of on machine measuring the longitudinal form error of bull gears with the rack probe is introduced, the data evaluation model of longitudinal form error is established, and a measuring example is given.
对渐开线齿轮廓面特性进行了映射分析 ,介绍了齿条刃边测头在机测量大型齿轮齿向误差的基本原理及测量方案 ,建立了齿向误差的数据评定模型 ,并给出了测量实
3.
With Pro/E and ANSYS,find the extremum of the main errors(site error and longitudinal form error of the gear) that influence the reliability of the whole mechanism and define reasonable tolerance so as to not only decrea.
针对微小型无返回力矩钟表机构,考虑微小型零件的加工工艺及该机构的高承载、高转速的恶劣工作工况,以有限元法与赫兹理论相结合,建立了包含制造误差的有限元力学模型,以Pro/E和ANSYS为工具,得出了主要影响机构运行可靠性的齿轮的齿向误差、位置误差极限,从而确定了微小型齿轮的合理公差,进而保证了该机构的运行的可靠性,并且在一定程度上降低了对加工工艺的要求,从而降低了加工成本,为微小型零件的公差制定提供了一定借鉴。
补充资料：步距误差
分子式：
CAS号：
性质： 光学掩模版列或行上相邻功能图形中，某图像的点与相应图像对应点之间的距离叫步距。实测步距与规定步距之差即步距误差。
CAS号：
性质： 光学掩模版列或行上相邻功能图形中，某图像的点与相应图像对应点之间的距离叫步距。实测步距与规定步距之差即步距误差。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条