1) tooth space error
齿间误差
2) profile error
齿形误差
1.
Research on Coordinate Method for Measuring the Profile Error of Wormgears;
坐标法测量蜗轮齿形误差的研究
2.
Measuring the Profile Error of the Involute Gear;
齿轮渐开线齿形误差的测量
3.
The tooth profile error and longitudinal form error are calculated,and the change rule with setting angle of them is got.
针对花键的齿形误差和齿向误差,按照误差计算原理,得出了计算结果及其随安装角改变的变化规律。
3) longitudinal form error
齿向误差
1.
The tooth profile error and longitudinal form error are calculated,and the change rule with setting angle of them is got.
针对花键的齿形误差和齿向误差,按照误差计算原理,得出了计算结果及其随安装角改变的变化规律。
2.
The features of involute gear profile are mapping analyzed, the principle and method of on machine measuring the longitudinal form error of bull gears with the rack probe is introduced, the data evaluation model of longitudinal form error is established, and a measuring example is given.
对渐开线齿轮廓面特性进行了映射分析 ,介绍了齿条刃边测头在机测量大型齿轮齿向误差的基本原理及测量方案 ,建立了齿向误差的数据评定模型 ,并给出了测量实
3.
With Pro/E and ANSYS,find the extremum of the main errors(site error and longitudinal form error of the gear) that influence the reliability of the whole mechanism and define reasonable tolerance so as to not only decrea.
针对微小型无返回力矩钟表机构,考虑微小型零件的加工工艺及该机构的高承载、高转速的恶劣工作工况,以有限元法与赫兹理论相结合,建立了包含制造误差的有限元力学模型,以Pro/E和ANSYS为工具,得出了主要影响机构运行可靠性的齿轮的齿向误差、位置误差极限,从而确定了微小型齿轮的合理公差,进而保证了该机构的运行的可靠性,并且在一定程度上降低了对加工工艺的要求,从而降低了加工成本,为微小型零件的公差制定提供了一定借鉴。
4) tooth error
齿形误差
1.
Application of virtual instrument technology in gear tooth error testing system
虚拟仪器技术在齿形误差检测系统中的应用
2.
This paper presents a new method to measure tooth error of small module gears.
0 mm)进行测量,提出了一种在视觉三坐标测量机上测量小模数齿轮齿形误差的新方法。
5) tooth profile error
齿形误差
1.
Research on the tooth profile error of gear shaving;
剃齿加工齿形误差的研究
2.
Study of measurement of tooth profile error of circular tooth gears by rectangular coordinates method;
用直角坐标法测量圆弧齿轮齿形误差
3.
By means of analysis and calculation,the conclusion is given a spiral normal section on the pitch cylinder of a hob basic worm is different from another;If the normal sec- tion in the center of the tooth line is taken as a tooth measuring and design section,when spline hob is designed in a plane meshing,the tooth profile error is minimum.
通过分析并进行计算得出:同一滚刀基本蜗杆,节圆柱上不同螺旋线的法剖面截形有明显差别;如果以齿纹中点法剖面作为齿形检测和设计剖面,用平面啮合法设计花键滚刀时,则齿形误差最小。
6) shaving error
剃齿误差
补充资料：操作间误差
分子式：
CAS号：
性质：由于操作的差异、不规范而产生的不同操作之间的误差。
CAS号：
性质：由于操作的差异、不规范而产生的不同操作之间的误差。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条