1) chrom copper
铬铜
1.
This paper studies the flow stress of chrom copper by experiment with the cam plastometer at a constant deformating rate, and analyses the effeets of flow stress under different deformation temperatures,different deformation rates and different deformation degrees.
采用恒变形率凸轮压缩试验机对铬铜的流动应力进行了实验研究，分析了变形温度、变形速率、变形程度对流动应力的影响，同时对不同的数学模型结构进行了非线性回归，通过分析比较，提出了拟合精度高的流动应力数学模型。
3) Cr-Zr-Cu
铬锆铜
1.
Investigations of wear resistance after Supersonic Particles Bombarding in Cr-Zr-Cu surface;
超音速颗粒轰击铬锆铜表面耐磨性能的研究
4) CuCr alloy
铜铬合金
1.
Effect of vacuum casting process on microstructure and properties of CuCr alloy;
真空熔铸工艺对铜铬合金组织与性能的影响
2.
The vacuum melting technique of some high chromium CuCr alloys in vacuum induction furnace was discussed and the absorptivity of Cr , the distribution and form of pre-eutectic Cr phase in Cu matrix were investigated.
探讨了高铬含量铜铬合金的真空熔炼工艺 ,重点讨论了铬的吸收率随配比中铬含量的变化关系 ,以及先共晶铬相的分布及形
3.
The effects of the additive CaF2 and preheating temperature of mold on the SHS reaction by which the CuCr alloy was prepared and its properties were investigated.
考察了添加剂CaF2及铸模预热温度等因素对自蔓延反应过程及合金性能的影响,分析了铜铬合金的金相组织及其化学成分,采用XRD技术对铜铬合金和熔炼渣进行了表征。
5) Cu-Cr alloy
铜铬合金
1.
The relationship between microstructure,mechanical properties and conductivity of Cu-Cr alloy material with cold deformation was investigated in the paper,together with the reason of wire fracture.
实验研究了拉拔变形程度与亚微米晶铜铬合金显微组织、力学性能和导电性能的关系,并分析了拉拔过程中断丝的原因。
2.
The corrosion behavior of cold rolled Cu-Cr alloy in humid air containing trace SO2 was investigated using scanning electron microscopy(SEM) and X-ray photoelectron(XPS).
采用SEM、XPS等测试方法,研究了铜铬合金在二氧化硫环境中的腐蚀情况。
3.
Cold deformation and heat treatment have been studied through testing mechanical property and conductivity of Cu-Cr alloy,and strengthening mechanism has been presented in the paper.
通过测试力学性能和导电性能,对铜铬合金进行了冷变形及退火工艺的探索,并进行了强化机理分析。
6) QCr0.8 chromium-bronze
QCr0.8铬青铜
补充资料：铬酸铜
分子式：CuCrO4
CAS号：
性质：红棕色结晶。溶于酸。不溶于水。加热至约400℃时逐渐分解成亚铬酸铜。在热水中则分解变成碱式铬酸铜。由过量的重铬酸钾溶液与氢氧化铜加热至220℃反应制得。亦可用铬酸溶液与氢氧化铜加热反应制得。用作印染的媒染剂。
CAS号：
性质：红棕色结晶。溶于酸。不溶于水。加热至约400℃时逐渐分解成亚铬酸铜。在热水中则分解变成碱式铬酸铜。由过量的重铬酸钾溶液与氢氧化铜加热至220℃反应制得。亦可用铬酸溶液与氢氧化铜加热反应制得。用作印染的媒染剂。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条