2) toughened plastics
增韧塑料
1.
Several kinds of toughened plastics and fully vulcanized thermoplastic elastomers with controllable morphology of rubber phase are prepared by blending the powder rubbers and different plastics.
该方法从橡塑共混中橡胶相形态调控的理论研究结果出发 ,研制出的粒径及其分布可控的纳米级全硫化粉末橡胶 ,它极易在塑料中分散 ,与不同塑料共混后可制成橡胶相形态可控的各种增韧塑料和全硫化热塑性弹性
3) rubber-toughened plastics
橡胶增韧塑料
4) Toughening Master Batch
增韧母料
1.
Two kinds of E toughening master batch-E1-TMB and E2TMB were synthesized with HDPE as matrix resin,ethylene-propylene elastomer(M) and butadiene-styrene elastomer(N) as toughening agents,by adding appropriate amount initiator and anti-crosslinker.
以HDPE为基体树脂,乙丙弹性体(M)和丁苯弹性体(N)为增韧剂,加入适量引发剂、阻交联剂等,通过化学反应研制出2种聚乙烯增韧母料E1-TMB和E2-TMB,将2种增韧母料与HDPE热机械共混制得HDPE/E1-TMB和HDPE/E2-TMB共混物。
2.
Five kinds of polyethylene toughening master batches(E-TMB) of different elastomer content were preapred with high density polyethylene(HDPE) as matrix resin,ethylene/propylene copolymer and butadiene/styrene copolymer as toughening agents,and HDPE/E-TMB blends with elastomer content of 6.
以高密度聚乙烯(HDPE)为基体树脂,(乙烯/丙烯)共聚物和(苯乙烯/丁二烯)共聚物为增韧剂研制出5种弹性体含量不同的聚乙烯增韧母料(E-TMB),将E-TMB与HDPE热机械共混制得弹性体总含量均为6。
3.
The HDPE/E-TMB blends were prepared,which were made through thermal mechanical blending HDPE with the self-made E toughening master batch(E-TMB).
用自制增韧母料(E-TM B)与HDPE热机械共混制得HDPE/E-TM B共混物。
5) toughness-enhancing material
增韧材料
1.
In order to solve the problem of the brittle fracture of cement sheath caused by perforation and other production-enhancing measures after the well cementing of thin oil reservoir wells, small-borehole wells and laterally-drilling wells, a fiber toughness-enhancing material for well-cementing cement is developed.
为了解决国内油田薄油层井、小间隙井和侧钻井固井后射孔及后续增产措施造成的水泥环脆裂(即二次窜流)问题,研制开发了油井水泥纤维增韧材料(增韧剂F17F)。
6) ROF-toughened plastics
刚性有机填料(ROF)增韧塑料
补充资料：氧化锆相变增韧陶瓷
分子式：
CAS号：
性质：一种利用氧化锆马氏体相变效应来改善脆性的陶瓷。氧化锆在由四方相向单斜相转变时(即马氏体相变)，伴随体积和形状变化。能吸收能量，减缓裂纹尖端的应力集中，阻止裂纹扩展，从而提高材料韧性，包括应力诱导相变增韧、裂纹弯曲增韧和微裂纹增韧。分为稳定氧化锆陶瓷(PSZ)、四方氧化锆多晶体陶瓷(TZP)和氧化锆增韧陶瓷(ZTC)三种。用于增强陶瓷基和金属基复合材料韧性。
CAS号：
性质：一种利用氧化锆马氏体相变效应来改善脆性的陶瓷。氧化锆在由四方相向单斜相转变时(即马氏体相变)，伴随体积和形状变化。能吸收能量，减缓裂纹尖端的应力集中，阻止裂纹扩展，从而提高材料韧性，包括应力诱导相变增韧、裂纹弯曲增韧和微裂纹增韧。分为稳定氧化锆陶瓷(PSZ)、四方氧化锆多晶体陶瓷(TZP)和氧化锆增韧陶瓷(ZTC)三种。用于增强陶瓷基和金属基复合材料韧性。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条