1) buckling/delamination buckling
屈曲/分层屈曲
2) delamination buckling
分层屈曲
1.
Based on Whitcomb delamination buckling model,a Rayleigh Ritz analysis is presented to determine the load or the temperature at which delamination buckling will occur for a composite laminate with a single elliptical delamination.
采用Ｗｈｉｔｃｏｍｂ薄膜分层屈曲模型，根据Ｒａｙｌｅｉｇｈ－Ｒｉｔｚ法建立了考虑温度效应时复合材料层合板分层屈曲的稳定性特征方程。
3) Buckling-driven delamination
屈曲分层
4) delamination buckling
脱层屈曲
1.
The Rayleigh-Ritz method is used to calculate the critical load at which delamination buckling will occur for a symmetric cross-ply composite laminate containing a single delamination.
用里兹法确定在单轴载荷条件下具有单一脱层的对称正交铺设层合板脱层屈曲的临界屈曲载荷。
2.
Delamination buckling is a significant part of loading capacity analysis of laminated composites.
脱层屈曲是复合材料层合结构力学承载能力分析的一个非常重要的组成部分。
3.
Using the Rayleigh-Ritz method the critical load at which delamination buckling will occur for a symmetric cross-ply composite laminate containing a single delamination under biaxial loads is determined .
瑞雷-里兹法用来计算包含单一脱层的对称正交铺设层板在双轴载荷作用下脱层屈曲的临界载荷。
5) buckling analysis
屈曲分析
1.
Study on buckling analysis of CFRP base on ANSYS;
基于ANSYS的CFRP屈曲分析研究
2.
In addition,buckling analysis simultaneous considering initial geometrical imperfection and geometrical nonlinear was performed by combining uniform imperfec.
基于ANSYS软件对试验全过程进行了非线性有限元模拟,并结合一致缺陷模态法与柱面弧长法,进行了同时考虑初始几何缺陷与几何非线性的屈曲分析。
3.
The result of buckling analysis of SAP 2000 shows that,for unconventional structure,the result of structure design software developed in accordance with the structural design specification is not reasonable.
利用SAP2000进行屈曲分析,结果表明:对于非常规结构,利用按结构设计规范编制的结构设计软件得到的结果不合理;同时介绍在此类结构的设计过程中对规范和软件的正确理解与运用,以及综合考虑各方面因素进行合理的节点设计。
6) linear-elsatic buckling
分支屈曲
补充资料：屈曲漏
屈曲漏 屈曲漏 病名。漏管屈曲多支之肛漏。《外科大成》卷二：“其管屈曲不直，难以下药至底也。”
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条