说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 屈曲
1)  Buckling [英]['bʌkl]  [美]['bʌkḷ]
屈曲
1.
Stress Concentration and Buckling Behaviour of Shear Loaded Composite Panels with Reinforced Cutouts;
带有开口增强的复合板在剪切荷载作用下的应力集中和屈曲性能研究
2.
Finite element analysis of shape buckling load for cold rolled strips;
冷轧带钢板形屈曲变形失稳限的有限元分析
3.
Numerical simulation and buckling analysis of tube external pressure forming;
管件外压成形的数值模拟及屈曲特征分析
2)  bucking [英][bʌk]  [美][bʌk]
屈曲
1.
The bucking analysis of bridge base piles with initial defect;
存在初始缺陷的桥梁基桩屈曲分析
2.
The critical bucking angles in twisting and pure bending are about 40°and 20°,respectively.
利用该模型对(5,5)型扶手椅型单壁碳纳米管的扭转和弯曲变形过程进行了模拟,发现其屈曲的临界扭转和纯弯曲角度分别约为40°和20,°与扭转屈曲相比,该碳管更容易发生弯曲屈曲
3.
The deformability of delivery pipe can be expressed in bucking strain.
输送管的变形能力可用屈曲应变表示,一般具有Round-house形应力-应变关系、均匀塑性延伸率高、形变强化指数n高、屈强比低的管线钢的变形能力较高,组织通过影响应力-应变关系和屈强比影响变形能力,另外D/t增加变形能力提高。
3)  Buckle [英]['bʌkl]  [美]['bʌkḷ]
屈曲
1.
Global bifurcation and chaotic dynamics for a non-autonomous buckled thin plate;
非自治屈曲薄板全局分叉与混沌动力学(英文)
2.
In elastic mechanics, it is common practice to calculate critical loads in buckle of thin plates by means of double triangle series.
弹性薄板屈曲的临界压力计算,在弹性力学中一般都是采用双三角级数解法,计算过程比较复杂,工程中应用不方便。
3.
BRB is it is one kind of axially loaded frame member that will yield in tension and compression but will not buckle.
地震是威胁人类生命财产安全的自然灾害,为减小地震对人类影响,建筑工程师和科学家们经过多年试验研究提出了屈曲约束支撑(Buckling-RestrainedBraces,简称BRB)这一概念。
4)  Flexion [英]['flekʃn]  [美]['flɛkʃən]
屈曲
1.
Clinical study of rapid traction of flexion or stretch for lumbar disc herniation;
屈曲或背伸位快速牵引对腰椎间盘突出症治疗的研究
2.
Objective To investigate the effect of continuous passive motion(CPM) and rehabilitation on flexion of the shoulder after intensive burn.
目的研究持续被动运动(CPM)和康复疗法改善深度烧伤后肩关节屈曲功能障碍的临床效果。
5)  flexure [英]['flekʃə]  [美]['flɛkʃɚ]
屈曲
1.
Repair flexure malformation of finger and digitalweb-space adhesion at one stage;
烧伤后手指严重屈曲挛缩和指蹼粘连的Ⅰ期修复
2.
Methods The software Mechanica, one of the module of Pro/Engineer was implemented to the flexure analysis of the inner canister.
方法:应用大型分析软件Pro/Engineer的Mechanica模块对内筒结构进行屈曲分析。
3.
Taking into account the influence of moisture and heat,with the function of beam and the theory of Galerkin,the paper studies the flexure of two-way orthogonal isomerism rectangle slab in every direction which is fix upped in four sides.
在考虑湿热影响的基础上,采用梁函数及G a lerk in原理研究了四边固支的正交各向异性矩形板的屈曲,并讨论和分析了长宽比、板厚等因素对矩形板湿热状态下屈曲的影响。
6)  flexor (flexion)
屈肌(屈曲)
补充资料:屈曲
屈曲  家具铜饰件。是一根两头稍尖的扁形铜条,将中间弯曲后形成孔眼。两头尖端同时穿过家具物件,弯脚后,将面叶、面条固着在一定的部位。还可供套上吊牌、吊环组成家具的拉手等。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条