说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 刚性被粘物
1)  stiff adherend
刚性被粘物
2)  adherend
被粘物
3)  rigid-viscoplastic
刚粘塑性
1.
The deduction of the calculation formulas for rigid-viscoplastic FEM based on penalty-function method and previous constitutive model;
基于罚函数法和前期本构模型的刚粘塑性FEM求解列式的推导
2.
The key technologies of 3D coupled rigid-viscoplastic thermo-mechanical FEM simulation of blade forging process were studied systematically.
采用基于边界构形的内缩法,实现了三维畸变网格的重新划分;提出了初矢修正法对触模节点的位置进行修正,解决了由于离散的模具网格的法矢不连续造成的"死锁"问题;采用准静态迭代法简化了速度场和温度场耦合计算过程;特别是针对减速因子β的选取,建立了适用于三维复杂成形过程刚粘塑性罚函数法有限元三次因子法的计算公式,并结合进退搜索法提出了改进的三次因子快速算法,提高了模拟计算效率和稳定性。
3.
3D rigid-viscoplastic FEM of weakly compressible materials is employed to analyze the deformation behavior during twist-compression forming of cylideric elements.
运用体积微可压缩法的三维刚粘塑性有限元方法。
4)  rigid viscoplastic
刚粘塑性
1.
In this paper,as the coupled thermo mechanical effects between the temperature and mechanical properties being taken into account,3D thermo rigid viscoplastic FEM of compressible materials is employed to coupled analyze the deformation behavior during metal twist compression forming of cylinder at high temperature.
考虑到成形过程中温度与变形间的热力耦合效应,作者运用刚粘塑性有限元方法,详细分析了高温下圆柱体的扭压成形的变形规律。
2.
In order to establish accurate constitutive equations for hot deformation of rigid viscoplastic materials, a large number of compress tests have been done on mechanical testing machine (Instron) using L 2 Aluminum as testing material.
本文针对刚粘塑性材料提出了本构方程的数学模型,并在实验的基础上给出了纯铝(L2)材料的本构方程的具体形
3.
On the basis of the rigid viscoplastic FEM theory,a surface defect prediction method for the plastic forming process by FEM numerical simulation has been thoroughly studied.
基于刚粘塑性有限元基本理论,本文深入地研讨了通过有限元数值模拟来预测塑性成形问题中一类表面缺陷生成的方法。
5)  rigid/viscoplastic
刚/粘塑性
6)  adhesive setae
粘性刚毛
补充资料:被粘物
分子式:
CAS号:

性质:准备胶接的物体或胶接后胶层两边的物体。也有被粘物是基材的情况,如压敏胶带的载体。被粘物和种类,表面处理,形状(厚、宽等)不同,用同一胶黏剂的粘接强度也不同。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条