1) Coiler mother tube
盘管坯
3) tube billet
管坯
1.
The forming limit of forward extrusion and cross rolling tube billet;
管坯正挤—横轧的成形极限
2.
Uniformity of heat flux on tube billets heated in ring oven;
环形加热炉内管坯辐射热流均匀性的分析
3.
The relations between the dimension of tube billets and the shape of finished products were investigated and compared with the computational results.
以铅管为材料,对钎钢的轧制过程进行了试验研究,分析了轧制工艺参数及管坯尺寸对成品外形的影响,并与数值模拟结果进行了对比,两者吻合较好,从而验证了钎钢轧制过程模拟结果的正确性和可靠性,为确定合理的轧制工艺参数提供了理论依据。
4) Tube Blank
管坯
1.
Practice of Steelmaking Process for of N80 Grade Steel 36Mn2V for Oil well Tube Blank;
油井用N80级36Mn2V非调质钢管坯的冶炼工艺实践
2.
The production flow,after forged heat treatment and final heat treatment process for the high strength tube blank have been described in this article.
介绍了高强度管坯的生产流程及锻后热处理、最终热处理工艺。
3.
This paper introduces practice on producing quality carbon steel for seamless tube blank with LD-LF process in Hangzhou Iron & Steel Group Company.
介绍了应用转炉加LF精炼生产合格的优质碳素管坯钢的情况。
5) tubular
[英]['tju:bjələ(r)] [美]['tubjəlɚ]
管坯
1.
Closed loop control of spray height in tubular preparation with reciprocating spray deposition process;
往复式喷射沉积管坯制备中喷射高度的闭环控制
2.
Deposition behavior and movement parameters optimization for reciprocating spray forming tubular;
往复式喷射成形管坯沉积特性及运动参数优化
3.
Process principle of reciprocating spray forming large thick-wall tubular was analyzed.
介绍了基底往复式喷射成形制备大壁厚管坯的工艺原理,并对雾化锥流率的空间分布和单层沉积轨迹进行了研究,在此基础上建立了单层沉积的数学模型。
6) pipe blank
管坯
1.
To insure the spinning temperature,the interspace of pipe blank and mold is less than or equal to 0.
要确保旋压温度,管坯的长度在成品倍尺内取短倍尺,管坯内径与芯模之间的间隙不大于0。
补充资料：天津钢管公司管坯在250连轧管机组的穿孔机上穿孔
天津钢管公司管坯在250连轧管机组的穿孔机上穿孔
天津钢管公司管坯在250连轧管机组的穿孔机上穿孔
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条