1) steel ball wheel
磨钢球砂轮
1.
The pressure in each part of steel ball wheel, the pressur consumption becausr of rubbing of the materials against both the mould and the core as well as the shrinkage in cach part of the afte firing are obtained by measuring the green wheed and its volume density after firing, Thus the cause of radial and axial cracks of the wheel is analysed.
通过测量磨钢球砂轮坯体和焙烧工序后产品各部位的体积密度，可以知道磨钢球砂轮各部位的压力大小，模具环和模具芯律与成型科摩擦对成型压力的耗散以及焙烧后各部位的烧成收缩情况，从而分析磨钢球砂轮产生径向裂纹和内孔小裂纹的主要原因。
2) abrasive wheel
磨轮，砂轮
4) steel shot abrasive
钢砂磨粒
6) grinding wheel wear
砂轮磨损
1.
The Influence of Grinding Wheel Wear on Transmission Properties of Quasi-Plane Double Enveloping Hourglass Worm Gearing;
砂轮磨损对准平面二次包络环面蜗杆传动性能的影响
2.
Comparison was made on the grinding parameters including grinding ratio(G-ratio) and grinding wheel wear.
通过分别采用国产陶瓷结合剂CBN砂轮与刚玉砂轮对45淬硬钢工件进行磨削试验,对磨削过程中的参数:磨削比和砂轮磨损进行对比。
3.
According to the grinding experiment, the Kullback-Leibler information distance method is used to recognize grinding wheel wear states in the grinding process by means of the signal processing to grinding sparks.
通过磨削试验 ,应用KL信息距离法对磨削火花信号进行处理以识别磨削过程中砂轮磨损状态的变化。
补充资料：钢球盘磨机
分子式：
CAS号：
性质：是盘式辊磨机的一种，其有一排或多排钢球处于两个座圈之间，上座圈不动，用弹簧或液压施压于钢球，下座圈抖动，顶部有分级机。过载时上座圈可略为升起，对于湿物料可以送入高温的热风起干燥作用并夹带磨碎产品排入上方的风力分级机(图暂缺)。钢球直径为235mm或1070mm。该机产量高，一般用于煤的粉碎。
CAS号：
性质：是盘式辊磨机的一种，其有一排或多排钢球处于两个座圈之间，上座圈不动，用弹簧或液压施压于钢球，下座圈抖动，顶部有分级机。过载时上座圈可略为升起，对于湿物料可以送入高温的热风起干燥作用并夹带磨碎产品排入上方的风力分级机(图暂缺)。钢球直径为235mm或1070mm。该机产量高，一般用于煤的粉碎。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条