1)  EPDM
元乙丙橡胶
2)  EPDM
三元乙丙橡胶
1.
Research Headway of EPDM Blend System;
三元乙丙橡胶共混改性的研究进展
2.
Preparation,structure,properties and application prospect of EPDM/clay nanocomposites;
三元乙丙橡胶/蒙脱土纳米复合材料的制备、结构、性能与应用前景
3.
Preparation of an Adhesive for Bonding EPDM;
三元乙丙橡胶粘接用胶黏剂的研制
3)  ethylene-propylene-diene rubber
三元乙丙橡胶
1.
Forward extrusion simulation and invert die design of ethylene-propylene-diene rubber in simple dies;
三元乙丙橡胶在简单口型中的正向挤出分析及逆向口型设计
2.
Mixing processing properties of chloroprene rubber/ethylene-propylene-diene rubber blends;
氯丁橡胶/三元乙丙橡胶共混胶的混炼工艺性能
3.
Effect of modified carbon black on mechanical properties and processability of ethylene-propylene-diene rubber;
改性炭黑增强三元乙丙橡胶的力学性能与加工性能
4)  EPR
二元乙丙橡胶
1.
Easily-open infusion bottle cover material was prepared with PP as a basic material and EPR as additive by melting crossblending method.
以聚丙烯(PP)为基材,加入一定量的低密度聚乙烯(LDPE)和增塑剂邻苯二甲酸二辛酯(DOP)通过与二元乙丙橡胶(EPR)熔融共混制备了易开启式输液瓶外盖用料。
2.
PP was taking as basic material,and blended with ethylene propylene rubber(EPR)by means of melt blending to prepare easy openable infusion bottle-cover materials,in which a certain amount of LDPE and plasticizer was added to improve the compatibility and mechanical properties of the blend.
以聚丙烯(PP)为基材,与二元乙丙橡胶(EPR)用熔融共混的方法,制备易开启式输液瓶外盖用料,并加入一定量的低密度聚乙烯(LDPE)和增塑剂以改善体系相容性和力学性能,讨论了增塑剂邻苯二甲酸二辛酯(DOP)、乙酰柠檬酸三正丁酯(ATBC)及丙三醇对共混体系力学性能的影响。
3.
Functionalized EPDM and EPR were prepared with glycidyl methacrylate(GMA), maleic anhydride(MAH) and acrylic acid (AA) as the grafting monomers and 2,5-dimethyl-2,5-di-(t-butylperoxyhexane) as the initiator.
用２，５－二甲基－２，５－二叔丁基过氧基己烷为引发剂，甲基丙烯酸环氧丙酯（ＧＭＡ）、马来酸酐（ＭＡＨ）和丙烯酸（ＡＡ）为接枝单体，对三元乙丙橡胶（ＥＰＤＭ）和二元乙丙橡胶（ＥＰＲ）进行熔融接枝，接枝产物用ＦＴＩＲ、１３Ｃ－ＮＭＲ等进行了表征，并用化学滴定方法对接枝率进行了测定。
5)  ethylene propylene diene monomer
三元乙丙橡胶
1.
Morphology and properties of ultra-fine full-vulcanized styrene butadienerubber powder/ethylene propylene diene monomer blends;
超细全硫化粉末丁苯橡胶/三元乙丙橡胶共混物的结构与性能
2.
Morphological structure of dynamically vulcanized thermoplastic elastomer of ethylene propylene diene monomer/polypropylene;
三元乙丙橡胶/聚丙烯动态硫化热塑性弹性体的相态结构
3.
Properties of intumescent flame retardant ethylene propylene diene monomer/polypropylene thermoplastic vulcanizate;
膨胀阻燃三元乙丙橡胶/聚丙烯热塑性硫化胶的性能
6)  EPDM rubber
三元乙丙橡胶
1.
The effect of Acrylonitrile-Butadiene's contents in EPDM rubber inhibitor formulations on the inhibitor's performance of resisting nitroglycerin migration is investigated by intermediate layer method.
采用夹层法研究了丁腈橡胶含量对三元乙丙橡胶包覆剂抗硝化甘油迁移性能的影响。
2.
Polypropylene was modified by using smelted ash powder/EPDM rubber blends as toughener.
将粉煤灰与三元乙丙橡胶(EPDM)混炼后与聚丙烯树脂熔融共混进行增韧改性。
3.
The optimum properties of the set EPDM rubber insulation are as follows: density 1.
确定最佳配方和工艺生产出的三元乙丙橡胶绝热层密度为1。
参考词条
补充资料：二元乙丙橡胶
分子式：
分子量：
CAS号：

性质：见乙丙橡胶。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。