1) maleic anhydride modified ethylene propylene diene rubber(EPDM_MA)
三元乙丙橡胶(EPDM_MA)
2) EPDM
三元乙丙橡胶
1.
Research Headway of EPDM Blend System;
三元乙丙橡胶共混改性的研究进展
2.
Preparation,structure,properties and application prospect of EPDM/clay nanocomposites;
三元乙丙橡胶/蒙脱土纳米复合材料的制备、结构、性能与应用前景
3.
Preparation of an Adhesive for Bonding EPDM;
三元乙丙橡胶粘接用胶黏剂的研制
3) ethylene-propylene-diene rubber
三元乙丙橡胶
1.
Forward extrusion simulation and invert die design of ethylene-propylene-diene rubber in simple dies;
三元乙丙橡胶在简单口型中的正向挤出分析及逆向口型设计
2.
Mixing processing properties of chloroprene rubber/ethylene-propylene-diene rubber blends;
氯丁橡胶/三元乙丙橡胶共混胶的混炼工艺性能
3.
Effect of modified carbon black on mechanical properties and processability of ethylene-propylene-diene rubber;
改性炭黑增强三元乙丙橡胶的力学性能与加工性能
4) ethylene propylene diene monomer
三元乙丙橡胶
1.
Morphology and properties of ultra-fine full-vulcanized styrene butadienerubber powder/ethylene propylene diene monomer blends;
超细全硫化粉末丁苯橡胶/三元乙丙橡胶共混物的结构与性能
2.
Morphological structure of dynamically vulcanized thermoplastic elastomer of ethylene propylene diene monomer/polypropylene;
三元乙丙橡胶/聚丙烯动态硫化热塑性弹性体的相态结构
3.
Properties of intumescent flame retardant ethylene propylene diene monomer/polypropylene thermoplastic vulcanizate;
膨胀阻燃三元乙丙橡胶/聚丙烯热塑性硫化胶的性能
5) EPDM
乙丙三元橡胶
1.
Permeability and selectivity of CO_2, N_2, and CH_4 gases through a sulfonated ethylene-propene-diene terpolymer (EPDM) ionomer membrane containing Co(Ⅱ)were further investigated.
进一步研究了CO2、N2和CH4对乙丙三元橡胶(EPDM)磺酸钴(Co(Ⅱ)-S-EPDM)离聚体膜的渗透和分离性能。
2.
The effect of Zinc-neutralized sulfonated EPDM(Zn-SEPDM)and EPDM on the crystalline and amorphous regions of isotactic polypropylene (IPP)and the compatibility of IPP/EPDM and IPP/Zn-SEPDM blends were studied through SAXS.
本文通过SAXS、DMA和TEM研究了乙丙三元橡胶(EPDM)和乙丙橡胶磺酸锌盐(Zn-SEPDM)对等规聚丙烯(IPP)晶体结构的影响以及IPP/Zn-SEPDM和IPP/EPDM共混物的相容性。
3.
With AlCl3 as catalyst in solution system,the influence of temperature,amounts of catalyst,kinds of solvent on properties of crosslinking and grafting of ethylene-propylene-diene terpolymer(EPDM)were investigated.
以无水AlCl3为催化剂,在溶液体系考察了温度、催化剂用量、溶剂品种等因素对乙丙三元橡胶(EPDM)交联与接枝性能的影响。
6) EPDM rubber
三元乙丙橡胶
1.
The effect of Acrylonitrile-Butadiene's contents in EPDM rubber inhibitor formulations on the inhibitor's performance of resisting nitroglycerin migration is investigated by intermediate layer method.
采用夹层法研究了丁腈橡胶含量对三元乙丙橡胶包覆剂抗硝化甘油迁移性能的影响。
2.
Polypropylene was modified by using smelted ash powder/EPDM rubber blends as toughener.
将粉煤灰与三元乙丙橡胶(EPDM)混炼后与聚丙烯树脂熔融共混进行增韧改性。
3.
The optimum properties of the set EPDM rubber insulation are as follows: density 1.
确定最佳配方和工艺生产出的三元乙丙橡胶绝热层密度为1。
补充资料：乙丙三元胶EPDM
CAS: 25038-36-2
分子式: (C9H12·C3H6·C2H4)x
中文名称: 乙丙三元胶EPDM
5-亚乙基双环[2.2.1]庚-2-烯与乙烯和1-丙烯的聚合物
丙烯/乙烯/亚乙基降冰片烯三元的共聚物
英文名称: Propylene-ethylene-ethylidene norbornene terpolymer
5-ethylidene-bicyclo[2.2.1]hept-2-en polymer with ethene and 1-propene
ethylene/propylene/diene terpolymer
Bicyclo[2.2.1]hept-2-ene,5-ethylidene-,polymer with ethene and 1-propene
分子式: (C9H12·C3H6·C2H4)x
中文名称: 乙丙三元胶EPDM
5-亚乙基双环[2.2.1]庚-2-烯与乙烯和1-丙烯的聚合物
丙烯/乙烯/亚乙基降冰片烯三元的共聚物
英文名称: Propylene-ethylene-ethylidene norbornene terpolymer
5-ethylidene-bicyclo[2.2.1]hept-2-en polymer with ethene and 1-propene
ethylene/propylene/diene terpolymer
Bicyclo[2.2.1]hept-2-ene,5-ethylidene-,polymer with ethene and 1-propene
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条