1) vinyl ester based unsaturated polyester resin
乙烯基酯不饱和聚酯树脂
1.
The processing of glass-reinforced plastic cover for Model 16 Hooker electrolyzer with vinyl ester based unsaturated polyester resin was introduced.
叙述了用乙烯基酯不饱和聚酯树脂制作虎克－１６型玻璃钢电解槽盖的施工方法，介绍了乙烯基酯不饱和聚酯树脂的性能。
2) phenolic-novolac epoxy based vinyl ester unsaturated polyester resin
酚醛环氧乙烯基酯不饱和聚酯树脂
3) unsaturated polyester resin
不饱和聚酯树脂
1.
Studies on flexible unsaturated polyester resin from polyether glycol and its flexible curing system;
聚醚二元醇不饱和聚酯树脂及其柔性固化体系
2.
Modified unsaturated polyester resin by N-phenyl maleimide;
N-苯马来酰亚胺改性不饱和聚酯树脂
3.
Advances in modification of unsaturated polyester resin;
不饱和聚酯树脂改性研究进展
4) unsaturated polyester
不饱和聚酯树脂
1.
Stabilization process advance of unsaturated polyester resin;
不饱和聚酯树脂的稳定化技术进展
2.
The preparation and stability of unsaturated polyester W/O emulsions;
不饱和聚酯树脂 W/ O型乳液的制备及其稳定性
3.
The various influencing factors and main synthesis processes of dicy clopentadiene modified unsaturated polyester resin are investigated.
探讨了双环戊二烯改性不饱和聚酯树脂的各种影响因素及其合成的主要工艺条件。
5) UPR
不饱和聚酯树脂
1.
The effect of SiO_2 addition on the mechanical properties of UPR;
二氧化硅对不饱和聚酯树脂浇铸体力学性能的影响
2.
The development and application of unstaturated polyester resion (UPR) are summarized.
综述了近年来不饱和聚酯树脂的发展及应用。
3.
Benzoperoxide/N,N-dimethylaniline initiator system that can eliminate the danger of using MEKPO/Co salt system used in UPR at room temperature was studied in this paper.
采用过氧化苯甲酰/N,N-二甲基苯胺(DMA)固化体系室温条件下对不饱和聚酯树脂(UPR)进行固化,可以降低常用的过氧化酮/钴盐体系的危险性。
6) UP resin
不饱和聚酯树脂
1.
This paper studies the self-made low profile additive and its influence on shrinkage rate and mechanical properties of UP resin.
本文研究了自制低收缩添加剂用量对不饱和聚酯树脂固化收缩率与力学性能的影响。
2.
The paper investigates the influence of structure, mould design, moulding process, regulating and coating on the warpage of UP resin DMC moulded panel, related control measures are also provided.
探讨了结构、模具设计、模压工艺条件、整形处理及涂漆等因素对不饱和聚酯树脂DMC模塑面板翘曲变形的影响,并提出相应的控制措施。
3.
The casting and FRP flame retardancy rule of UP resin are studled and a resin system for panel which is of good flame retardancy property,mechanical property satisfied for design,effectiye process,and low cost etc.
本文以不饱和聚酯树脂为研究对象，探讨其浇铸体和玻璃钢的阻燃规律，寻求阻燃性能优异、力学性能满足要求、工艺可行、成本低的面板用树脂体系。
补充资料：酚醛环氧乙烯基酯不饱和聚酯树脂
分子式：
CAS号：
性质：含有酚醛环氧甲基丙烯酸酯结构的不饱和聚酯树脂。较双酚A二缩水甘油醚(即双酚A环氧)型乙烯基酯聚酯交联密度大、热变形温度高、耐热性好，但可挠性和耐碱性稍差。多数性能基本相似。铸塑料热变形温度129℃。增强塑料的拉伸强度29.42MPa，拉伸模量17.16GPa，弯曲强度31.36MPa，弯曲模量14.7GPa，冲击强度86kJ/m2；体积电阻率5.41×1013Ω·cm，介电强度25.9MV/m。由苯酚、甲醛制成线型酚醛树脂后，再与甲基丙烯酸反应制得。可制作玻璃纤维增强塑料和铸塑料等用于耐高温、耐腐蚀和耐溶剂等方面的设备和零部件。
CAS号：
性质：含有酚醛环氧甲基丙烯酸酯结构的不饱和聚酯树脂。较双酚A二缩水甘油醚(即双酚A环氧)型乙烯基酯聚酯交联密度大、热变形温度高、耐热性好，但可挠性和耐碱性稍差。多数性能基本相似。铸塑料热变形温度129℃。增强塑料的拉伸强度29.42MPa，拉伸模量17.16GPa，弯曲强度31.36MPa，弯曲模量14.7GPa，冲击强度86kJ/m2；体积电阻率5.41×1013Ω·cm，介电强度25.9MV/m。由苯酚、甲醛制成线型酚醛树脂后，再与甲基丙烯酸反应制得。可制作玻璃纤维增强塑料和铸塑料等用于耐高温、耐腐蚀和耐溶剂等方面的设备和零部件。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条