1) bath boiling
溶池沸腾
2) boiling molten pool
沸腾状溶池
3) pool boiling
池式沸腾
1.
Investigation of CaSO_4 scale formation under pool boiling;
池式沸腾条件下CaSO_4污垢生成的实验研究
2.
A new method was developed to obtain a new kind of enhanced surface for pool boiling heat transfer.
引 言核状池式沸腾是一种成核现象 ,它包括气泡的产生、气泡的生长以及气泡的脱离 3个阶段 。
3.
Fouling runs were carried out under pool boiling condition with heat fluxes of 100-300kWm-2 and a saturated CaSO4 concentration at 100 篊.
在池式沸腾装置中对CaSO4溶液的结垢过程进行了实验研究,并将离子注入表面的抗垢性能与未处理表面进行了比较。
4) pool boiling
池沸腾
1.
Bubble dynamics and heat transfer mechanism of pool boiling of R-113;
R-113池沸腾气泡行为的可视化及传热机理
2.
Experimental Investigation on the Pool Boiling Heat Transfer Characteristics of R123 outside Single Horizontal Tubes;
R123水平强化单管外池沸腾换热实验研究
3.
Experimental research on pool boiling heat transfer of water-lithium bromide solution at vacuum;
溴化锂水溶液在真空下池沸腾换热的实验研究
5) nucleate pool boiling
池核沸腾
1.
Investigation on Heat Transfer and Calcium Carbonate Scale Formation during Nucleate Pool Boiling;
池核沸腾传热与CaCO_3垢生成的研究
2.
Therefore, the nucleate pool boiling heat transfer coefficients of methanol have been tested for 9 JK-2 tubes, a JK-1 tube and a smooth tube.
测试了甲醇在９根第二代机械加工表面多孔管（ＪＫ－２管）、１根第一代机械加工表面多孔管（ＪＫ－１管）和１根光滑管上的单管饱和池核沸腾传热系数，结果表明，ＪＫ－２管比ＪＫ－１管能更有效地强化甲醇的池核沸腾传热。
3.
The nucleate pool boiling heat transfer coefficients of water on 9 JK-2 tubes, a JK-1 tube and a smooth tube were measured.
测试了水在9根第2代机械加工表面多孔管(JK-2管)、1根第1代机械加工表面多孔管(JK-1管)和1根光滑管上的单管饱和池核沸腾传热系数,结果表明,JK-2管比JK-1管能更有效地强化水的池核沸腾传热。
6) boiling pool
沸腾池
1.
Under the beyond design basis accidental condition,the accidental subassembly steps into boiling pool period quickly.
快堆内发生超设计基准事故后,故障组件盒会发展到沸腾池,事故下一步的传播取决于池壁破损。
补充资料：池沸腾
分子式：
CAS号：
性质：指加热壁面被沉浸在无宏观流速的流体表面下所发生的沸腾。这时从加热表面产生的气泡能脱离表面自由浮升。池沸腾时，液体的运动只是由自然对流和气泡扰动引起。
CAS号：
性质：指加热壁面被沉浸在无宏观流速的流体表面下所发生的沸腾。这时从加热表面产生的气泡能脱离表面自由浮升。池沸腾时，液体的运动只是由自然对流和气泡扰动引起。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条