1) differential scanning calorimeter
差示扫描量热计
1.
Specific heat capacities of 5 gasoline fractions were measured at temperatures from 243K to 299K by a differential scanning calorimeter(DSC)with an average deviation less than ±2%.
用差示扫描量热计（ＤＳＣ）测定５个汽油馏分（沸点小于２００℃）在２４３～２９９Ｋ范围内的比热容，测量误差在±２％以内。
2) DSC
示差扫描量热计
1.
The bulk polymers were charactrerized by NMR, IR, DSC and thethermogravimetry (TG).
来用连续加料法,以二元醇-KOH为引发剂合成一组不同组成的环氧乙烷-环氧丙烷无规共聚醚,并用核磁共振、红外光谱、示差扫描量热计和热失重等方法对其本体聚合物,用浊点和表面张力测定的方法对其水溶液,进行系统的表征。
3) DSC
差示扫描量热
1.
Two-step Consecutive Reaction Model of Biomass Thermal Decomposition by DSC;
基于差示扫描量热技术的生物质热解两步连续反应模型研究
2.
STUDY ON THE CURING REACTION OF MODIFIED BMI CDR9418 WITH DSC;
差示扫描量热法研究改性双马来酰亚胺的固化过程
3.
STUDIES ON THE ABSORBED WATER IN SOME MEMBRANES BY DSC;
几种膜结合水的差示扫描量热研究
4) differential scanning calorimetry
差示扫描量热法
1.
As an advanced test method,differential scanning calorimetry(DSC) has been often applied in high polymer chemistry,such as the study of the curing behavior of thermosetting resin and the setting-up,of a reasonable curing process.
差示扫描量热法(DSC)技术近年来广泛应用于高分子材料领域,已成为实验室研究热固性树脂固化特性,确定固化生产工艺的一种常用手段,但在管道防腐涂敷施工方面很少报道。
2.
The nanocrystallization kinetics of amorphous Finemet alloy was investigated by differential scanning calorimetry(DSC).
利用差示扫描量热法(DSC)研究了非晶Finemet合金的纳米晶化动力学行为。
3.
The purity was determined by High Performance Liquid Chromatography(HPLC) and Differential Scanning Calorimetry(DSC).
建立了高效液相色谱法(HPLC)和差示扫描量热法(DSC)检测防老剂D纯度的条件。
5) DSC
差示扫描量热仪
1.
Improvement of Data Processing System of DSC-2C;
Perkin—Elmer公司DSC－2C差示扫描量热仪数据处理站的改进与功能扩展
2.
The thermal properties of all the starches during pasting were analyzed by performing DSC.
采用差示扫描量热仪(DSC)分析了原淀粉和羟丙基淀粉的糊化过程中的热力学性质。
3.
In this paper, the isothermal crystallization kinetics of the prepared poly(butylene succinate-co-butylene terephthalate) (PBST) is investigated by differential scanning calorimeter (DSC).
利用差示扫描量热仪(DSC)对制备的生物降解性聚丁二酸丁二醇-共-对苯二甲酸丁二醇酯(PBST)的等温结晶性能进行了研究。
6) differential scanning calorimeter
差示扫描量热法
1.
The continuous specific heat capacities at constant pressure(Cp) of energetic materials of mono-substituted potassium(K1TNPG),di-substituted(K2TNPG) and tri-substituted(K3TNPG) trinitrophloroglucinate were measured by differential scanning calorimeter(DSC) method.
用差示扫描量热法(DSC)测定了含能材料2,4,6-三硝基-1,3,5-苯三酚一取代(K1TNPG),二取代(K2TNPG)及三取代钾盐(K3TNPG)定压下的连续比热容,计算了在50~100℃温度范围内每间隔5℃的焓差值和熵变值。
2.
The parameters of Ka、Kb、m and n were evaluated by isothermal differential scanning calorimeter(DSC).
为了描述四缩水甘油基-4,4,-二氨基二苯甲烷/1,4-双(4-氨基苯氧基)苯(TGDDM/144BAPB)树脂体系的固化行为,由反应机理提出了一个动力学模型:dα/dt=Ka(1-α)2+Kbαm(1-α)n,由等温差示扫描量热法(DSC)求出参数Ka、Kb、m、n的值,结果表明:由模型算出的反应速率和由DSC实验得出的结果吻合得很好。
3.
用DSC(差示扫描量热法)研究了3种聚乙烯(PE)管材专用料在等温和非等温条件下的熔融、结晶行为。
补充资料：量热计
分子式：
分子量：
CAS号：
性质：也称量热仪、量热器或卡计。测量体系发生物理的或化学的过程热效应的仪器。例如，用于测定物质的热容及各种反应热（如中和热、燃料与食物的燃烧值、有机化合物的燃烧热）等。
分子量：
CAS号：
性质：也称量热仪、量热器或卡计。测量体系发生物理的或化学的过程热效应的仪器。例如，用于测定物质的热容及各种反应热（如中和热、燃料与食物的燃烧值、有机化合物的燃烧热）等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条