1) DSC
差示热量扫描
2) DSC
差示扫描量热
1.
Two-step Consecutive Reaction Model of Biomass Thermal Decomposition by DSC;
基于差示扫描量热技术的生物质热解两步连续反应模型研究
2.
STUDY ON THE CURING REACTION OF MODIFIED BMI CDR9418 WITH DSC;
差示扫描量热法研究改性双马来酰亚胺的固化过程
3.
STUDIES ON THE ABSORBED WATER IN SOME MEMBRANES BY DSC;
几种膜结合水的差示扫描量热研究
3) differential scanning calorimetry
差示扫描量热法
1.
As an advanced test method,differential scanning calorimetry(DSC) has been often applied in high polymer chemistry,such as the study of the curing behavior of thermosetting resin and the setting-up,of a reasonable curing process.
差示扫描量热法(DSC)技术近年来广泛应用于高分子材料领域,已成为实验室研究热固性树脂固化特性,确定固化生产工艺的一种常用手段,但在管道防腐涂敷施工方面很少报道。
2.
The nanocrystallization kinetics of amorphous Finemet alloy was investigated by differential scanning calorimetry(DSC).
利用差示扫描量热法(DSC)研究了非晶Finemet合金的纳米晶化动力学行为。
3.
The purity was determined by High Performance Liquid Chromatography(HPLC) and Differential Scanning Calorimetry(DSC).
建立了高效液相色谱法(HPLC)和差示扫描量热法(DSC)检测防老剂D纯度的条件。
4) DSC
差示扫描量热仪
1.
Improvement of Data Processing System of DSC-2C;
Perkin—Elmer公司DSC－2C差示扫描量热仪数据处理站的改进与功能扩展
2.
The thermal properties of all the starches during pasting were analyzed by performing DSC.
采用差示扫描量热仪(DSC)分析了原淀粉和羟丙基淀粉的糊化过程中的热力学性质。
3.
In this paper, the isothermal crystallization kinetics of the prepared poly(butylene succinate-co-butylene terephthalate) (PBST) is investigated by differential scanning calorimeter (DSC).
利用差示扫描量热仪(DSC)对制备的生物降解性聚丁二酸丁二醇-共-对苯二甲酸丁二醇酯(PBST)的等温结晶性能进行了研究。
5) differential scanning calorimeter
差示扫描量热法
1.
The continuous specific heat capacities at constant pressure(Cp) of energetic materials of mono-substituted potassium(K1TNPG),di-substituted(K2TNPG) and tri-substituted(K3TNPG) trinitrophloroglucinate were measured by differential scanning calorimeter(DSC) method.
用差示扫描量热法(DSC)测定了含能材料2,4,6-三硝基-1,3,5-苯三酚一取代(K1TNPG),二取代(K2TNPG)及三取代钾盐(K3TNPG)定压下的连续比热容,计算了在50~100℃温度范围内每间隔5℃的焓差值和熵变值。
2.
The parameters of Ka、Kb、m and n were evaluated by isothermal differential scanning calorimeter(DSC).
为了描述四缩水甘油基-4,4,-二氨基二苯甲烷/1,4-双(4-氨基苯氧基)苯(TGDDM/144BAPB)树脂体系的固化行为,由反应机理提出了一个动力学模型:dα/dt=Ka(1-α)2+Kbαm(1-α)n,由等温差示扫描量热法(DSC)求出参数Ka、Kb、m、n的值,结果表明:由模型算出的反应速率和由DSC实验得出的结果吻合得很好。
3.
用DSC(差示扫描量热法)研究了3种聚乙烯(PE)管材专用料在等温和非等温条件下的熔融、结晶行为。
6) differential scanning calorimetry
示差扫描量热法
1.
The cure kinetics of bisphenol-S epoxy resin(BPSER) and m-phenylenediamine were studied by means of differential scanning calorimetry(DSC).
用示差扫描量热法(DSC)研究了双酚-S环氧树脂(BPSER)与间苯二胺固化反应的历程。
2.
During the training procedure the transformation temperatures and hysteresis are measured by differential scanning calorimetry (DSC).
在训练过程中 ,作者用示差扫描量热法 (Differen tialScanningCalorimetry ,DSC)研究了不同热力学训练的试样 。
补充资料：张示
1.张贴或张挂起来让大家看。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条