1) PEEK
[英][pi:k] [美][pik]
聚醚醚酮
1.
Synthesis and characterization of PEEK;
工程塑料聚醚醚酮的合成与表征
2.
Tribological behavior of PEEK composites filled with various surface modified whiskers;
晶须表面改性及其填充聚醚醚酮摩擦学行为
2) polyetheretherketone
聚醚醚酮
1.
Polyetheretherketone (PEEK) is a super thermal engineering plastic material which has significant performances , particularly in respects of fracture toughness, damage tolerance and resistance to hot, and wet environments.
聚醚醚酮树脂在复合材料中呈现典型的球状结构,这种晶体结构发生在树脂相或纤维表面,导致聚醚醚酮基体和碳纤维之间存在良好的界面结合力。
2.
The basic physical and chemical properties of polyetheretherketone(PEEK) composites are presented and the research progresses on tribological behaviors of particle filled,fiber reinforced and plasma treaded PEEK composites are reviewed.
介绍聚醚醚酮(PEEK)的基本物理化学性能,评述粒子填充、纤维增强、有机-无机共混和等离子处理PEEK复合材料的摩擦磨损性能研究进展,指出今后应加强对多因素协同作用下PEEK复合材料磨损机理、开展PEEK复合材料微观摩擦学及生物摩擦学方面的研究。
3.
The friction and wear behavior of polyetheretherketone(PEEK) composites reinforced with carbon fibers was investigated on the abrasion tester under dry sliding against 45* steel disc at room temperature.
用磨损试验机对碳纤维增强聚醚醚酮(PEEK)复合材料进行室温干滑动磨损试验,考察了碳纤维的含量、石墨润滑剂、对磨时间及载荷对材料磨损量及摩擦系数的影响,并用电子显微镜对其磨损表面进行了观察与分析,同时对材料的磨损机理进行了探讨。
3) poly(ether ether ketone)
聚醚醚酮
1.
Dynamic Mechanical Properties of Controllable Cross-linking Poly(ether ether ketone)s;
可控交联聚醚醚酮的动态力学性能
2.
Synthesis of Crosslinkable Fluorinated Poly(ether ether ketone);
可交联含氟聚醚醚酮的合成
3.
Dynamic Rheological Behavior for Controllable Cross-linking Poly(ether ether ketone)s;
可控交联聚醚醚酮动态流变学行为的研究
4) poly (ether ether ketone)
聚醚醚酮
1.
Fluorinated poly (ether ether ketone) for the fabrication of 32-channel arrayed waveguide grating multiplexer;
用于32通道阵列波导光栅的氟化聚醚醚酮
2.
A novel poly (ether ether ketone) derived from 4,4'-diflourodiphenylketone, bisphenol-S and 2-(6-oxide-6H-dibenz <1,2> oxa phosphorin-6-yl) -1,4-dihydroxy-phenylene was synthesized by solution polycondensation.
以9,10-二氢-9-氧杂-10-磷酰杂菲-对苯二酚(DOPO-HQ),4,4’-二氟二苯甲酮(DFK)和双酚S(DDS)为单体,通过溶液缩聚合成了含磷双酚S型聚醚醚酮。
3.
Poly (ether ether ketone) (PEEK), a high-temperature resistant thermoplastic resin, has been used in a lot of fields because of its excellent properites.
聚醚醚酮(PEEK)具有突出的耐高温水解和耐辐照性能以及良好的断裂韧性,现已在核能、宇航等高技术领域得到应用。
5) polyether ether ketone
聚醚醚酮
1.
The characteristics, application and production route of special engineering plastics polyether ether ketone were introduced.
介绍特种工程塑料聚醚醚酮(PEEK)的性能特征、用途、生产方法、国内外生产和市场情况,并对其在我国的发展前景进行了展望。
2.
The recent study progress in the tribological investigation of polyether ether ketone (PEEK) composites is evaluated in detail.
聚醚醚酮 (PEEK)基复合材料是一类重要的高性能热塑性聚合物 ,在工程中有重要的应用价值。
补充资料：聚醚醚酮
分子式：
CAS号：
性质： 系由两个芳醚键和一个酮键组成的重复单元所生成的高分子量聚合物。由二氟二苯甲酮与4,4′-二羟基二苯醚在碱性作用下经高温缩聚而成为的一类特种工程塑料。熔点334℃，玻璃化温度为143℃，热变形温度HDT(1.82MPa)160℃，拉伸强度94MPa，压缩强度120MPa，比热容1.33J/(g·k)。热膨胀系数4.7×10-5m/(m·℃)，极限氧指数35(3.2mm)。具有较高的热氧稳定性和耐化学药品性，应用于电绝缘材料、润滑材料、涂料及结构材料。
CAS号：
性质： 系由两个芳醚键和一个酮键组成的重复单元所生成的高分子量聚合物。由二氟二苯甲酮与4,4′-二羟基二苯醚在碱性作用下经高温缩聚而成为的一类特种工程塑料。熔点334℃，玻璃化温度为143℃，热变形温度HDT(1.82MPa)160℃，拉伸强度94MPa，压缩强度120MPa，比热容1.33J/(g·k)。热膨胀系数4.7×10-5m/(m·℃)，极限氧指数35(3.2mm)。具有较高的热氧稳定性和耐化学药品性，应用于电绝缘材料、润滑材料、涂料及结构材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条