1) poly(ether ether ketone ketone)
聚醚醚酮酮
1.
Nonisothermal Melt Crystallization Kinetics Studies on Thio-ether-contained Poly(ether ether ketone ketone) Copolymer;
含硫醚结构聚醚醚酮酮共聚物的非等温结晶动力学
2.
Melting and Crystallization Behavior of Poly(ether ether ketone)/Poly(ether ether ketone ketone) Blends;
聚醚醚酮/聚醚醚酮酮共混体系的熔融和等温结晶行为
3.
Studies on Isothermal Crystallization Kinetics of Poly(ether ether ketone ketone);
聚醚醚酮酮等温结晶动力学的研究
2) PEEKK
聚醚醚酮酮
1.
A study has been made on the effect of thermal history on crystallize and melting behaviors of poly (etheretherketoneketone) (PEEKK) by using differential scanning calorimeter (DSC).
用差示扫描量热法（ＤＳＣ）研究不同热历史聚醚醚酮酮（ＰＥＥＫＫ）的结晶熔融行为。
2.
Then a series of sulfonated PEEKKs derived from the monomer were synthesized via aromatic nucleophilic substitution polycondensation of phenolphthalein with different molar ratios of 1,4-bi(3-sodium sulfonate-4-fluorobenzoyl)benzene to 1,4-bi(4-fluorobenzoyl)benzene.
利用亲核缩聚反应 ,调整磺化单体和非磺化单体的比例 ,与酚酞进行聚合 ,制取了具有不同磺化度的聚醚醚酮酮 ,并对聚合物的结构进行了表征 。
3.
The performance,synthesis and modification research of five kinds of high performance poly(aryl ether ketone)(PAEK) such as PEK,PEEK,PEEKK,PEKK,PEKEKK are summarized,and their applications are presented.
综述了聚醚酮、聚醚醚酮、聚醚醚酮酮、聚醚酮酮、聚醚酮醚酮酮等5类高性能聚芳醚酮的性能、合成方法及其改性研究进展等,并介绍了聚芳醚酮的应用情况,指出聚芳醚酮的发展趋势是通过开发新的合成技术或者改性途径,在不影响其主要性能的前提下降低生产成本。
3) PEEK
[英][pi:k] [美][pik]
聚醚醚酮
1.
Synthesis and characterization of PEEK;
工程塑料聚醚醚酮的合成与表征
2.
Tribological behavior of PEEK composites filled with various surface modified whiskers;
晶须表面改性及其填充聚醚醚酮摩擦学行为
4) polyetheretherketone
聚醚醚酮
1.
Polyetheretherketone (PEEK) is a super thermal engineering plastic material which has significant performances , particularly in respects of fracture toughness, damage tolerance and resistance to hot, and wet environments.
聚醚醚酮树脂在复合材料中呈现典型的球状结构,这种晶体结构发生在树脂相或纤维表面,导致聚醚醚酮基体和碳纤维之间存在良好的界面结合力。
2.
The basic physical and chemical properties of polyetheretherketone(PEEK) composites are presented and the research progresses on tribological behaviors of particle filled,fiber reinforced and plasma treaded PEEK composites are reviewed.
介绍聚醚醚酮(PEEK)的基本物理化学性能,评述粒子填充、纤维增强、有机-无机共混和等离子处理PEEK复合材料的摩擦磨损性能研究进展,指出今后应加强对多因素协同作用下PEEK复合材料磨损机理、开展PEEK复合材料微观摩擦学及生物摩擦学方面的研究。
3.
The friction and wear behavior of polyetheretherketone(PEEK) composites reinforced with carbon fibers was investigated on the abrasion tester under dry sliding against 45* steel disc at room temperature.
用磨损试验机对碳纤维增强聚醚醚酮(PEEK)复合材料进行室温干滑动磨损试验,考察了碳纤维的含量、石墨润滑剂、对磨时间及载荷对材料磨损量及摩擦系数的影响,并用电子显微镜对其磨损表面进行了观察与分析,同时对材料的磨损机理进行了探讨。
5) poly(ether ether ketone)
聚醚醚酮
1.
Dynamic Mechanical Properties of Controllable Cross-linking Poly(ether ether ketone)s;
可控交联聚醚醚酮的动态力学性能
2.
Synthesis of Crosslinkable Fluorinated Poly(ether ether ketone);
可交联含氟聚醚醚酮的合成
3.
Dynamic Rheological Behavior for Controllable Cross-linking Poly(ether ether ketone)s;
可控交联聚醚醚酮动态流变学行为的研究
6) poly (ether ether ketone)
聚醚醚酮
1.
Fluorinated poly (ether ether ketone) for the fabrication of 32-channel arrayed waveguide grating multiplexer;
用于32通道阵列波导光栅的氟化聚醚醚酮
2.
A novel poly (ether ether ketone) derived from 4,4'-diflourodiphenylketone, bisphenol-S and 2-(6-oxide-6H-dibenz <1,2> oxa phosphorin-6-yl) -1,4-dihydroxy-phenylene was synthesized by solution polycondensation.
以9,10-二氢-9-氧杂-10-磷酰杂菲-对苯二酚(DOPO-HQ),4,4’-二氟二苯甲酮(DFK)和双酚S(DDS)为单体,通过溶液缩聚合成了含磷双酚S型聚醚醚酮。
3.
Poly (ether ether ketone) (PEEK), a high-temperature resistant thermoplastic resin, has been used in a lot of fields because of its excellent properites.
聚醚醚酮(PEEK)具有突出的耐高温水解和耐辐照性能以及良好的断裂韧性,现已在核能、宇航等高技术领域得到应用。
补充资料：聚醚醚酮酮
分子式：
CAS号：
性质：是在主链结构的重复单元中含有两个醚键和两个酮基的高分子聚合物，典型结构为是一类半结晶性的高聚物，熔点大于360℃，玻璃化温度174℃，拉伸强度118MPa，断裂伸长率31％，压缩模量5.3GPa，热膨胀系数3.4×10-5m/(m·℃)，具有高的热氧稳定性和耐化学药品性，应用于结构材料、复合材料、电绝缘材料、润滑材料等领域。
CAS号：
性质：是在主链结构的重复单元中含有两个醚键和两个酮基的高分子聚合物，典型结构为是一类半结晶性的高聚物，熔点大于360℃，玻璃化温度174℃，拉伸强度118MPa，断裂伸长率31％，压缩模量5.3GPa，热膨胀系数3.4×10-5m/(m·℃)，具有高的热氧稳定性和耐化学药品性，应用于结构材料、复合材料、电绝缘材料、润滑材料等领域。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条