1) Corrosive cell principle
腐蚀电池原理
1.
According to the Corrosive cell principle,Iron Scurf-Fly Ash is used to treat electroplating wastewater containing chromium.
根据腐蚀电池原理 ,用铁屑 -粉煤灰处理电镀含铬废水 ,结果表明 ,Cr(Ⅵ )去除率达到 98%处理后出水水质良好 ,水质符合排放标准要求 。
3) galvanic cell corrosion
原电池腐蚀
1.
All kinds of corrosion degree charts are obtained,the principles of galvanic cell corrosion are analysed,inappropriate metal connecting forms and a listing of environment medium in order of corrosive effect are indicated.
分析原电池腐蚀机理,指出不利的金属搭接方式和环境介质严酷程度的排序。
4) corrosive cell
腐蚀电池
1.
Using corrosive cell process to strengthen the follow-up biochemical processing for the treatment of printing and dyeing wastewater;
腐蚀电池法强化后续生化工艺处理印染废水
2.
This study investigated the treatment of landfill leachate by using continuous Fenton system in combination with aeration and corrosive cell between iron scraps and granular activated carbon(GAC).
针对垃圾渗滤液有机污染大、氨氮浓度高、可生化性差的特点,利用铁屑和颗粒活性炭(GAC)构成腐蚀电池反应所产生的Fe2+,以及通入空气中O2在阴极被还原产生的H2O2组成连续Fenton试剂对其进行处理。
3.
The authors put forward that printing and dyeing wastewater can be treated bycorrosive cell process composed of iron filings and flue dust.
提出利用铁屑和烟道灰组成腐蚀电池，治理印染废水的方法。
5) corrosion cell
腐蚀电池
1.
The quick and high rate of the treatment is mainly due to the adsorption and reduction action of the corrosion cell.
该法处理速度快、效率高，主要原因是处理过程中同时发生了吸附作用和腐蚀电池还原作用。
2.
The rapid speed and high rate of the treatment are mainly due to the adsorption and the corrosion cell decolorization.
吸附作用和腐蚀电池还原脱色作用是该法处理速度快、效率高的主要原因。
补充资料：多电极腐蚀电池
分子式：
CAS号：
性质：多于两个金属相组成的腐蚀电池系统。若这些金属相单独存在时的电位分别为φ1，φ2，…φN，则该多电极腐蚀电池的总电位φc总是处于最高与最低电位之间，电位低于总电位的金属相是阳极相，电位高于总电位的金属相是阴极相。当该电池处于稳定状态，即外电流为零时，系统中总的阳极电流与总的阴极电流相等，都等于该多电极腐蚀电池的腐蚀电流。
CAS号：
性质：多于两个金属相组成的腐蚀电池系统。若这些金属相单独存在时的电位分别为φ1，φ2，…φN，则该多电极腐蚀电池的总电位φc总是处于最高与最低电位之间，电位低于总电位的金属相是阳极相，电位高于总电位的金属相是阴极相。当该电池处于稳定状态，即外电流为零时，系统中总的阳极电流与总的阴极电流相等，都等于该多电极腐蚀电池的腐蚀电流。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条