1) corrosive cell-Fenton process
腐蚀电池-Fenton工艺
1.
Pretreatment of landfill leachate with corrosive cell-Fenton process;
腐蚀电池-Fenton工艺用于垃圾渗滤液的预处理研究
2) corrosive cell
腐蚀电池
1.
Using corrosive cell process to strengthen the follow-up biochemical processing for the treatment of printing and dyeing wastewater;
腐蚀电池法强化后续生化工艺处理印染废水
2.
This study investigated the treatment of landfill leachate by using continuous Fenton system in combination with aeration and corrosive cell between iron scraps and granular activated carbon(GAC).
针对垃圾渗滤液有机污染大、氨氮浓度高、可生化性差的特点,利用铁屑和颗粒活性炭(GAC)构成腐蚀电池反应所产生的Fe2+,以及通入空气中O2在阴极被还原产生的H2O2组成连续Fenton试剂对其进行处理。
3.
The authors put forward that printing and dyeing wastewater can be treated bycorrosive cell process composed of iron filings and flue dust.
提出利用铁屑和烟道灰组成腐蚀电池，治理印染废水的方法。
3) corrosion cell
腐蚀电池
1.
The quick and high rate of the treatment is mainly due to the adsorption and reduction action of the corrosion cell.
该法处理速度快、效率高，主要原因是处理过程中同时发生了吸附作用和腐蚀电池还原作用。
2.
The rapid speed and high rate of the treatment are mainly due to the adsorption and the corrosion cell decolorization.
吸附作用和腐蚀电池还原脱色作用是该法处理速度快、效率高的主要原因。
5) etching process
腐蚀工艺
1.
Study on the etching process of aluminum foil for electrolytic capacitor;
电解电容器用铝箔腐蚀工艺研究
6) micro-electrolysis-Fenton process
微电解-Fenton工艺
1.
To improve the biodegradability and achieve a high organic removal rate,the pretreatment performance of refractory dyeing wastewater with the micro-electrolysis-Fenton process was investigated.
研究了微电解-Fenton工艺对难降解染料工业废水预处理效果,在提高染料废水可生化的同时实现有机物去除。
补充资料：宏电池腐蚀
分子式：
CAS号：
性质：宏电池存在下产生的腐蚀。金属的腐蚀过程是由于异种金属接触,或与金属接触的介质的浓度差异(主要是盐浓差、氧浓差)、温度差异等,会使金属表面存在由肉眼可分辨的电极所构成的“大电池”而导致的腐蚀加剧。在实际工作中,严重的腐蚀现象往往是微电池和宏电池共同作用加剧腐蚀的结果。
CAS号：
性质：宏电池存在下产生的腐蚀。金属的腐蚀过程是由于异种金属接触,或与金属接触的介质的浓度差异(主要是盐浓差、氧浓差)、温度差异等,会使金属表面存在由肉眼可分辨的电极所构成的“大电池”而导致的腐蚀加剧。在实际工作中,严重的腐蚀现象往往是微电池和宏电池共同作用加剧腐蚀的结果。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条