1) Plate shape
厚板板型
2) thick plate
厚板
1.
Welding technology of Cu-Ni alloy B10 thick plate;
Cu-Ni合金B10厚板焊接工艺
2.
Friction-stir welding on thick plate of 7A52 aluminum alloy;
7A52铝合金厚板搅拌摩擦焊
3.
Prediction of angular distortion in thick plate multi-pass weld;
厚板多层多道焊角变形分析方法
3) plate
厚板
1.
Construction and reform/expansion of aluminum alloy plate worldwide;
世界铝厚板系统的建设与改扩建
2.
The effects of total deformation on the microstructure and room temperature tensile properties of BT-20 alloy plate were studied in α+β.
主要研究了在α+β区总变形量对BT-20钛合金厚板组织与性能的影响,获得了在两相区总变形量控制在71%、85%和91%生产出的三种规格厚板在相同热处理制度下的显微组织以及所对应的室温力学性能。
3.
The effects of four typical structures on the mechanical properties, impact ductility and fracture toughness etc of BT-20 alloy plate were studied under the conditions of room & high temperature.
主要研究了BT-20钛合金厚板4种典型组织对室温、高温力学性能、冲击和断裂韧度等性能的影响。
4) thick plates
厚板
1.
The natural transverse vibrations of rectangular thick plates with viscoelastic on viscoelastic foundation;
粘弹性基础上粘弹性矩形厚板的固有横振
2.
Structures refinement of Al-Zn-Mg-Cu-Cr alloy thick plates;
Al-Zn-Mg-Cu-Cr合金厚板组织细化
3.
An analytical method of stress analysis for thick plates subjected to dead weight is proposed in this paper.
本文建议一个在自重作用下厚板应力分析的解析法。
5) heavy plate
厚板
1.
Practice of improving the profile shape and performance of heavy plate;
提高厚板板形质量和性能的实践
2.
Research of deficient deformation leveling model in heavy plate;
厚板不充分变形矫直工艺方案研究
3.
TMCP process was applied to the rolling of 70mm-thick Q345C heavy plate steel to control its strength,ductility and toughness.
结果表明,采用该无热处理的未再结晶区大压下量TMCP工艺试验的厚板,轧后无论采用空冷还是加速冷却,力学性能都满足GB/T1591-94的要求,且厚度方向力学性能均匀性良好;加速冷却钢板铁素体晶粒细化更为明显,表面与心部铁素体晶粒尺寸稍有差异。
6) thick slab
厚板
1.
thick slab transfer and the detailing are mainly discussed.
本文介绍了该工程的结构设计要点,着重阐述了厚板转换及相应的构造措施。
2.
The design method of thick slab of transferring storey of the commercial and dwelling building is introduced, and the measures of the main technical issues are presented in this paper.
对某商住楼结构转换层厚板的设计理念和一些主要技术问题的处理方法进行了探讨。
参考词条
补充资料：板板
1.乘戾，反常。 2.形容表情冷淡﹑严肃。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。