1) Wide and heavy plate
宽厚板
1.
Research on The Transportation System Of Wide and Heavy Plate s Roll-on-roll-off shipping;
宽厚板滚装运输体系研究
2.
According to an analysis of main factors affecting the yield ratio of wide and heavy plate,a software of slab design for wide and heavy plate has been successfully developed by means of expert system.
通过对影响宽厚板成材率主要因素的分析,并结合专家系统,开发研制了坯料计算专家系统。
3.
According to the analysis of main factors affecting the wide and heavy plate yield ratio,and combined with expert system,an expert system software of yield ratio management for wide and heavy plate has been successfully programmed.
通过对宽厚板成材率主要影响因素的分析,并结合专家系统,研制开发了成材率管理专家系统。
2) heavy plate
宽厚板
1.
The products and features of process,main equipment and automation system of a domestic 3800mm heavy plate rolling line were introduced.
介绍了一套国内自主设计制造的3800mm宽厚板生产线的产品、生产工艺、主要设备和自动化控制系统的特点,该生产线达到了国内一流、国际先进的水平。
2.
The production process of modern heavy plate decides the strict requirement for choosing automatic measuring and controlling instruments.
现代宽厚板生产过程对仪表的自动检测和精度控制要求很高,现代化宽厚板的生产工艺决定了特殊检测仪表的重要性,在保证产品的质量及精度方面,全自动非接触特殊检测仪表起到了重要的作用。
3.
This text depicts the characteristic and main performance parameter of 45t-30m heavy plate ship-loader.
介绍了45 t-30 m 岸边宽厚板装船机的结构特点、主要技术性能参数，以及电控永磁吊具和回转吊架 在宽厚板装船机上的应用。
3) wide plate
宽厚板
1.
This paper puts forward a calculation model for wide plate rolling temperatures,based on which the maths model is made to be online self-adaptive,bringing the calculation temperature closer to practical measured values.
提出了宽厚板轧制温度计算模型,并在此基础上,对数学模型进行在线自适应,使计算温度更接近于实测值。
2.
The installation technology of double-side shear for 5 m wide plate was at Baosteel introduced in detail.
详细介绍了宝钢5m宽厚板双边剪安装技术。
4) heavy plate mill
宽厚板
1.
There are four rolling-cut shears on Baosteel 5m heavy plate mill shearing line.
宝钢5m宽厚板轧机剪切线共有四台滚切式剪切机,在钢板剪切过程中,剪刃间隙、夹送辊安装精度及同步性、剪刃安装精度、剪切机相关设备精度等诸多因素会影响剪切质量, 文章分析了剪切线设备与剪切质量相关的因素,并提出建议,以利于今后的生产和设备维护。
2.
According to the characteristic of producing heavy plates,the shares between the schedule management function of heavy plate mill L4 and L3 is discussed reasonably and effectively through the establishment for the planning management frame that is suitable for the characteristic of producing and managing heavy plates.
根据厚板生产特点,通过建立适用于厚板生产管理特点的计划管理框架,合理有效地解决了厚板L4及厚板L3的作业计划管理功能分担;通过引入命令现品及目的现品文件,巧妙地实现了厚板复杂的物料跟踪;通过采用“大工序套小工序”及欠件管理模式,建立厚板合同跟踪模型;成功地构建了厚板L4系统中的生产管理系统,实现了宽厚板生产管理信息共享,日常生产管理工作的计算机化。
5) wide and thick plate
宽厚板
1.
The technologic configuration of rare earth magnetic disc in waste water treatment of wide and thick plate production of Han Steel is introduced,the treatment result and affecting factors analyzed.
针对宽厚板生产线废水的特点,介绍了稀土磁盘在邯钢中板厂宽厚板生产线废水处理中的工艺布置,对废水处理效果及影响因素进行了分析。
6) thick and wide slab
宽厚板坯
1.
Technological features of thick and wide slab caster in Wuyang Steel;
舞钢新建宽厚板坯连铸机工艺技术特点
补充资料：鞍山钢铁(集团)公司厚板厂4300轧机轧制宽厚钢板
鞍山钢铁(集团)公司厚板厂4300轧机轧制宽厚钢板
鞍山钢铁(集团)公司厚板厂4300轧机轧制宽厚钢板
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条