1)  silicone-acrylate copolymer
硅丙接枝共聚物
2)  silicon acrylic
硅丙
3)  silicone-acrylate emulsion
硅丙乳液
1.
Preparation of high performance expanding type silicone-acrylate emulsion fireproof coating;
高性能膨胀型硅丙乳液防火涂料的制备
2.
A polyacrylate emulsion modified by silicone(silicone-acrylate emulsion) is prepared with sodium dodecyl sulfate(SDS) and OP-10 as emulsifier,acrylate and ethylene silicone oils as raw materials by means of continuous dripping.
由于有机硅的低表面能和硅氧烷的长链大分子结构,难以被乳化剂乳化而进入胶束,有机硅和丙烯酸单体的共聚受到很大限制,因此以丙烯酸酯、乙烯基硅油为主要原料,以OP-10和十二烷基硫酸钠(SDS)为复合乳化剂,采用连续滴加法,制备了有机硅改性丙烯酸酯乳液(硅丙乳液)。
3.
Study was made of silicone-acrylate emulsion polymerized with silicone intermediate system of D4/MMvi andarchitectural coating prepared with it.
本文主要研究了八甲基环四硅氧烷(D4)/四甲基二乙烯基硅氧烷(MMvi)体系的有机硅中间体制备相应硅丙乳液及其硅丙涂料,考察了不同有机硅形式、不同的有机硅加入量对乳液性能和涂料漆膜性能的影响。
4)  silicone modified acrylate emulsion
硅丙乳液
1.
Self-crosslinking silicone modified acrylate emulsion is prepared by emulsion polymerization with octamethylcyclotetrasiloxane,vinyl siloxane coupling agent and acrylate monomers as raw materials.
以八甲基环四硅氧烷(D4)、乙烯基硅烷偶联剂和丙烯酸单体为原料,采用乳液聚合工艺制得自交联型硅丙乳液,研究了有机硅单体及硅烷偶联剂用量对乳液性能的影响。
5)  silicone-acrylic emulsion
硅丙乳液
1.
Study on Influence Factors of Synthesis Process and Product Properties of Silicone-acrylic Emulsion;
硅丙乳液合成过程及产品性能影响因素的研究
2.
Material selection,technological design and formula optimization in development of intumescent silicone-acrylic emulsion fire-retardant coating were reviewed,physicochemical properties and technical indexes of the coating were allover discussed.
叙述了硅丙乳液膨胀型防火涂料研制过程中的材料选择、工艺设计及配方优化,对该涂料的理化性能、技术指标等进行了全面讨论。
6)  silicone/acrylic latex
硅丙乳液
1.
This paper narrates raw material selection, technology design and compositions optimization of silicone/acrylic latex intumescent fire-retardant coatings; and discusses physical and chemical performances and technical index.
叙述了硅丙乳液膨胀型防火涂料研制过程中的材料选择、工艺设计及配方优化,对该涂料的理化性能、技术指标等进行了全面讨论。
参考词条
补充资料：氯乙烯和乙烯僧酸乙烯共聚物接枝共聚物
分子式：
CAS号：

性质：为在乙烯/醋酸乙烯共聚物(EVA)之大分子链上进行氯乙烯接枝共聚后得到之产品，按EVA中醋酸乙烯含量不同和接枝共聚物中EVA含量不同以及分子量大小，分为冲击改性剂用、硬质和软质品用三类。作冲击改性剂用和软质品用者多为EVA中VAC含量45％，EVA含量为50％。主要用于防水卷材、医用制品、电缆、记录材料和与PVC共混后作门窗型材。硬质品用者为EVA中VAC含量为15％，EVA含量5％～10％。除接枝物外含聚氯乙烯均聚物。可直接用作门窗型材和管材，冲击强度比一般PVC可提高4倍以上，将EVA溶于或分散于氯乙烯单体中进行悬浮聚合制得。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。