1) small sized cots
小胶辊
1.
An approach is done to the spandex core yarn with the small sized cots instead of the middle top rollers as to the main technical factors,optimized diameter selection as well as the spinning quality comparison.
探讨了小胶辊代替中铁辊纺氨纶包芯纱的主要技术因素、替代后最佳直径的选择,以及成纱质量的比较。
2) cot
[英][kɔt] [美][kɑt]
胶辊
1.
Comparative analysis of the the application of the cot telescoped with the standing telescoping machine FP-2 and the horizental telescoping machine shows that the standing telescoping machine is superior in compact structure,easy operation,wide application and strong practicability,thus in conformity with varieties of requirement of the cots in assembling and disassembling operation.
通过对FP-2型立式套胶辊机的使用并与A808型卧式套胶辊机套制的胶辊纺纱质量进行分析,说明立式套胶辊机具有结构紧凑、操作简便、适用范围广、实用性强等特点,能满足对各种胶辊的装拆要求,纺纱质量水平也比A808型套制的胶辊高,提高了纺纱质量,值得推广使用。
2.
Exploration is done to the relationship of cot structure,cot rigidity to evenness of the resultant yarn and yarn strength;relationship of cot rigidity to friction factor and linear width of nipper jaws;relationship of cot diameter and telescoping tolerance to quality of resultant yarn.
阐述了胶辊结构、硬度与成纱条干、强力的关系,胶辊硬度与摩擦因数、钳口线宽度的关系;胶辊直径、套差与成纱质量的关系;分析了低硬度胶辊改善成纱条干的机理,指出胶辊制作中必须注意的问题及纺纱工艺配置。
3.
Sampling the common problems in spinning process,spinnning performance of the cot and apron should be in conformity with the draft philosophy and develops in direction of cotton spinning technique.
举例说明纺纱应用技术中存在的问题,强调胶辊、胶圈的纺纱性能应遵循牵伸原理,其应用技术应符合棉纺工程技术的发展方向。
3) top roller
胶辊
1.
Test Analyses of Diameter Matching of Front Top Roller and Back Top Roller of Spinning Frame;
细纱前后档胶辊直径搭配试验分析
2.
Choice of Top Roller of FA322 Drawing Frame;
FA322型并条机胶辊的选配
3.
Using Management Experiences of Top Roller and Apron of Imported Spinning Equipment;
进口棉纺设备胶辊胶圈的使用管理体会
4) roller
[英]['rəʊlə(r)] [美]['rolɚ]
胶辊
1.
Preparation and research of HTV silicone rubber for roller;
胶辊用热硫化硅橡胶的制备
2.
The main properties, application, production technology, process and requirement for structure of main production equipment of casting polyurethaneelastomer rollers were discussed.
介绍浇注型聚氨酯弹性体(CPU)胶辊的主要性能、用途、生产技术、工艺过程及所需用的主要设备的结构要求。
5) cots
[英][kɔt] [美][kɑt]
胶辊
1.
Developing of cots voluble wrapping control system based on PLC;
基于PLC的胶辊缠绕包覆控制系统开发
2.
Based on the draw philosophy and application practice,analysis is done to the cots,the related draw accessories and special wares in relation to the spinnibg quality.
从牵伸原理和生产实践分析了胶辊及相关牵伸器材、专件与成纱质量的关系,说明胶辊对成纱质量提高的贡献是最主要的,其它牵伸器材、专件对稳定成纱质量也有一定作用;认为提高抗缠绕性、进一步降低硬度、提高回弹性是胶辊今后发展的方向。
3.
Detailed analysis is done to the mech-wave caused by the mech-defection in rollers,gears and cots.
详细分析环锭纺细纱机因机械缺陷造成的罗拉类、齿轮类和胶辊类机械波的成因,并针对性地提出相应的减缓或消除措施。
6) rubber-covered roll
胶辊
1.
New Product Exploration and Application Effect of Rubber-covered Roll and Apron;
胶辊胶圈新产品及应用效果
2.
Application of New Drawing Rubber-covered Roll with Iron-cored Bush;
新型并条胶辊铁芯轴套的应用
3.
The Research and Development of Automatic Winding-Wrapping Line Control System for Rubber-Covered Roll Based on the PLC;
基于PLC的胶辊缠绕包覆生产线自动控制系统研究与开发
补充资料：从动胶辊
分子式：
CAS号：
性质：该胶辊系在使用中不直接与动力源连接的胶辊。主要用于带式运输机起中间支撑的作用。
CAS号：
性质：该胶辊系在使用中不直接与动力源连接的胶辊。主要用于带式运输机起中间支撑的作用。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条