1) Ag-Cu-Si trinal system
Ag-Cu-Si合金
2) Cu-Ni-Si-Ag alloy
Cu-Ni-Si-Ag合金
1.
The flow stress behavior of Cu-Ni-Si-P alloy and Cu-Ni-Si-Ag alloy during hot compression deformation was studied by isothermal compression test at Gleeble-1500D thermal-mechanical simulator.
在Gleeble-1500D热力模拟试验机上采用等温压缩试验,对Cu-Ni-Si-P合金和Cu-Ni-Si-Ag合金在高温压缩变形中的流变应力行为和组织变化进行了研究。
3) Cu-Ag alloy
Cu-Ag合金
1.
Strain strengthening of Cu-Ag alloy in situ filamentary composites;
Cu-Ag合金原位纤维复合材料的应变强化效应
2.
Effects of annealing and cold-working on properties of continually-unidirectionally solidified Cu-Ag alloy;
热处理和冷变形对连续定向凝固Cu-Ag合金性能的影响
3.
The Cu-Ag alloy in situ filamentary composites with different Ag contents were prepared.
制备了具有不同Ag含量的Cu-Ag合金及其原位纤维复合材料,增加Ag含量可以细化铸态组织和Ag纤维尺寸,增大合金的极限拉伸强度和电阻率。
4) Cu-Si Alloy
Cu-Si合金
1.
High Temperature Oxidation Behavior of Cu-Si Alloy Prepared by Different Techniques;
不同方法制备的Cu-Si合金的高温氧化行为
2.
The oxidation resistance of two nanocrystalline Cu-Si alloys with different grain sizes prepared by conventional casting(CA) and mechanical alloying(MA) techniques were studied by the thermo-gravimetric method at 700 ℃ and 800 ℃ in 105 Pa flowing pure O2 for 24 h.
采用电弧熔炼和机械合金化方法制备了两种晶粒尺寸差别较大的Cu-Si合金,并采用热重分析方法对其在700℃和800℃、1×105Pa流动O2中氧化24 h的抗高温氧化性能进行了研究。
3.
The oxidation behaviour of casting Cu-Si alloys was studied at 700 ℃ and 800 ℃ in pure O2.
为了研究Si的添加量对Cu高温氧化行为的影响,采用电弧熔炼(CA)方法制备2种成分的Cu-Si合金(CA Cu-0。
5) Cu-Ag,Cu-Zr and Cu-Ag-Zr alloy
Cu-Ag、Cu-Zr和Cu-Ag-Zr合金
6) Ag-Cu-Zn alloy
Ag-Cu-Zn合金
1.
Adding Cr/Ti metal powder to improve brazing performance of Ag-Cu-Zn alloy to diamond;
Cr、Ti金属粉改善Ag-Cu-Zn合金对金刚石的钎焊性能研究
2.
Cr powder was added between Ag-Cu-Zn alloy and diamond grits to braze diamond on the steel substrate by means of high frequency induction heater.
在Ag-Cu-Zn合金钎料中添加Cr粉,将混合钎料用于钢基体上的金刚石高频感应钎焊。
3.
By appropriate process parameters,the Ag-Cu-Zn alloy ingot with good surface quality and even unidirectional microstructure was fabricated on the self-designed horizontal heated mould continuous casting apparatus.
在自制的水平式热型连铸设备上,选用合适的工艺参数制备出了表面质量良好、内部组织沿轴向均匀分布的Ag-Cu-Zn合金铸棒。
补充资料：A1-Cu-Co合金中十次对称准晶单晶体及其衍射图
A1-Cu-Co合金中十次对称准晶单晶体及其衍射图
‘ Al Cu—Co合金中十次对称准晶堕晶体e1)及其衍射圈(z) 中国科学盹垒禹研览听供稿
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条