说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 铸渗动力
1)  Surface chromized kinetics
铸渗动力
2)  infiltration pressing
渗流动力
1.
TiC/Ni/TiC multilayer composite material was produced by selfpropagating hightemperature synthesis and pseudohot isostatic pressingNi infiltrates along the thickness of the sample from the centre to two TiC layersThe infiltration pressing was analysed when Ni distributed gradually in the TiC layer Hardness values (HRA)are also measured in the TiC/Ni/TiC multilayer composit
理论上分析了Ni在两层TiC中呈梯度分布所需的渗流动力。
3)  Casting infiltration
铸渗
1.
Surface alloying of iron castings produced by EPC method using casting infiltration process;
用铸渗工艺对消失模铸铁件进行表面合金化的研究
2.
SiC particles reinforced steel matrix surface composites were prepared by V-EPC casting infiltration.
采用V-EPC铸渗方法,以Q235钢为母材制备SiC粒子增强钢基表面复合材料。
3.
Casting steel is alloyed by EPC using casting infiltration process.
利用消失模铸渗工艺对铸钢表面进行合金化,对铬铁加入量、粘结剂加入量、粒度、铸件模数等因素进行了试验研究,给出了合理的工艺方案。
4)  Casting-infiltration
铸渗
1.
Study on Microstructure of Hard Alloy Cladding Material Prepared by Casting-infiltration on the Surface of Piston Ring;
铸渗法制备活塞环表面硬质表层材料微观结构研究
2.
Preparation of Mo_2FeB_2 Reinforced Steel Substrate Composites by Casting-infiltration Method
铸渗法制备Mo_2FeB_2增强钢基表面复合材料
3.
Using Mo, Fe metal powders, and FeB alloy powders as raw materials, NaF, C, PVB as additives, the ternary boride hard alloy cladding material on ZG-45 casting-steel substrate is prepared by casting-infiltration reaction sintering process.
研究采用铸渗法制备三元硼化物硬质合金覆层钢基材料。
5)  Casting penetration
铸渗
1.
The development of casting penetration technology in our country;
我国铸渗技术的研究近况
2.
Dry sliding wear property of casting penetration composite layer with vanadium and chromium on the surface of cast steel was studied in the simulate condition by using MM-200 type friction-wear experimental machine.
采用MM-200磨损试验机,研究了不同钒铁颗粒含量的钒铬铸渗层干滑动磨损特性。
3.
Some technological measures to improve the result of casting penetration are summarized, and several main research problems that should be paid more attention to are also proposed.
介绍了铸渗法制备钢铁基表面耐磨复合材料的制备工艺分类、铸渗机理和铸渗组织研究的新进展 ,总结了新近开发的一些改善铸渗效果的工艺措施 ,并提出了今后研究工作中值得重视的几个问
6)  Cast penetration
铸渗
1.
Influence of Test Conditions on Impact Wear of W - Cr Cast Penetration;
试验条件对钨铬铸渗层冲击磨损性能的影响
补充资料:渗渗
1.寒冷貌。 2.指因害怕而产生发冷的感觉。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条