1) oxide debris
氧化物磨屑
1.
Covering of oxide debris particles on the worn surface leads to the protective effect on the worn surface.
结果表明 :高载下 3Cr2 W8V钢的力学性能是决定材料磨损特性的主要因素 ;氧化物磨屑对磨损面的保护作用是通过氧化物磨屑对磨损面的大面积覆盖实现的 ;室温低载下磨损面上形成氧化物磨屑的覆盖 ,而在室温高载和高温下都未形成氧化物磨屑的覆盖 ;高温高载下 ,主要因 3Cr2 W8V钢本身承载能力下降 ,氧化物磨屑未能覆盖于磨损面上 ,故对磨损面起不到保护作用。
2) debris
[英]['debri:] [美][də'bri]
磨屑
1.
Under the analyses of the development state for the debris on-line monitor in gearbox,the paper presents a kind of debris on-line monitor,in which the Electromagnet is used to cluster the debris,and HALL Components are used to measure the changes of the concentration for the debris in oil.
在分析国际上现行的磨屑在线监测传感器的基础上,提出了一种新型的磨屑监测传感器-电磁铁重复聚集磨屑,霍尔器件测量磨屑量的变化的磨屑,并对磨屑的传感与测量方式进行了实验研究。
2.
The wear debris of three semi-metallic friction materials reinforced by low carbon steel fiber,brass fiber and pure copper fiber respectively,and grey cast iron couple woren at different temperatures were studied by XRD and EDAX.
采用X射线衍射(XRD)和X射线能谱分析(EDAX)对分别使用低炭钢纤维、黄铜纤维和紫铜纤维增强的3种半金属摩擦材料与灰铸铁在不同温度下滑动摩擦形成的磨屑进行分析,并结合扫描电子显微镜(SEM)观察摩擦材料表面形貌,分析材料的磨损特性,并对黄铜纤维和紫铜纤维增强的摩擦材料磨屑成分进行对比分析。
3.
The debris of the composite has also been investigated by the DSC,FT-IR and SEM technique.
用环-块磨损实验机对复合材料进行了磨损试验,用SEM方法对复合材料的磨损表面进行了观察和分析,并利用DSC、FT-IR和SEM分析方法对复合材料的磨屑进行了研究,在上述基础上进行了复合材料的磨损机理探讨。
3) chip
[英][tʃɪp] [美][tʃɪp]
磨屑
1.
Inis necessary to produce efficiently qualified carbide chip with increasing application of cemented carbide tools material,Under conditions of dry and wet grinding,experimental investigation was carride out for plane grinding of YG6 and YT30 re-spectively.
本课题在干磨和湿磨条件下，分别对YG6和YT30进行了平面磨削的实验研究，并利用扫描电镜观察了在不同的磨削条件下，被磨削表面形貌、磨屑及磨削断面结构，在此基础上分析研究了硬质合金磨削过程中的材料去除机理。
4) wear debris
磨屑
1.
Effect of LPS on the osteolysis induced by wear debris in artificial joints;
脂多糖对人工关节磨屑诱导的骨溶解的影响
2.
Experimerntal study of etanercept effects the wear debris-induced osteolysis;
依那西普对磨屑诱导骨溶解影响的实验研究
3.
The wear debris are analyzed by Xray diffraction and worn surfaces by SE.
磨屑的Ｘ射线物相分析结果表明，加Ｎｉ、Ｔｉ的ＳｉＣ陶瓷复合材料与原ＳｉＣ陶瓷材料相比，在高温下的摩擦机制有着本质的不同，从而造成在摩擦学性能上有较大的差异。
5) oxidation wear
氧化磨损
1.
The rules of diffusion and oxidation wear for PCBN tool were studied based on thermodynamics.
从热力学的角度研究了PCBN刀具扩散磨损和氧化磨损规律,利用热力学模型计算不同温度下PCBN刀具加工钢铁、镍基合金、铝合金和钛合金时刀具材料扩散溶入工件材料中的浓度值。
2.
Adhesive wear,oxidation wear and diffusion wear were the main wear mechanisms of the cemented carbide tool.
研究结果表明,使用硬质合金刀具材料高速干车削Ti-6Al-4V时,刀具的磨损机理主要为粘结磨损、氧化磨损和扩散磨损。
3.
Diffusion and oxidation wear are the main wear mechanisms at such high temperature.
高速切削金属件的时候,切削温度高达800—1000℃以上,扩散氧化磨损成为PCD刀具的主要磨损原因。
6) fragments of animal fossil
动物化石碎屑
补充资料：钴钼氢氧化物氧化物磷酸盐
CAS：68130-37-0
中文名称：钴钼氢氧化物氧化物磷酸盐
英文名称：Cobalt molybdenum hydroxide oxide phosphate； Molybdenum cobalt acid phosphate complex； Molybdenumcobaltacid phosphate complex
中文名称：钴钼氢氧化物氧化物磷酸盐
英文名称：Cobalt molybdenum hydroxide oxide phosphate； Molybdenum cobalt acid phosphate complex； Molybdenumcobaltacid phosphate complex
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条