1) debris group
磨屑群
1.
The Application of Weibull Distribution in the Ferrography Based on Debris Group Theory;
Weibull分布在基于磨屑群理论的铁谱技术中的应用
2.
Based on the debris group theory, a new parameter of debris group characteristic, which was the sum of all debris that was in the inner loop of ferrogram and its size of long axis was more than a criterion, was put forward.
在磨屑群理论的基础上,提出了以KTP-1型旋转式铁谱仪制得谱片内圈内侧磨屑长轴尺寸大于某一临界值所有磨屑的总数,作为描述摩擦副磨损状态的磨屑群体特征参数。
3.
On the basis of applying mathematical statistics to construct debris group the procedure of quantified qualitative ferrographic analysis was simplified and normalized.
运用数理统计的有关原理和方法 ,通过构造磨屑群简化并规范了量化铁谱定性分析的过程 。
2) debris group theory
磨屑群理论
1.
The theoretic foundation and specific characteristic analysis methods of modern ferrography analysis technique besed on debris group theory are advanced.
提出了以磨屑群理论为基础的现代铁谱分析技术的理论依据和磨屑群体特征的提取方法。
3) debris group ferrography theory
磨屑群铁谱理论
4) debris
[英]['debri:] [美][də'bri]
磨屑
1.
Under the analyses of the development state for the debris on-line monitor in gearbox,the paper presents a kind of debris on-line monitor,in which the Electromagnet is used to cluster the debris,and HALL Components are used to measure the changes of the concentration for the debris in oil.
在分析国际上现行的磨屑在线监测传感器的基础上,提出了一种新型的磨屑监测传感器-电磁铁重复聚集磨屑,霍尔器件测量磨屑量的变化的磨屑,并对磨屑的传感与测量方式进行了实验研究。
2.
The wear debris of three semi-metallic friction materials reinforced by low carbon steel fiber,brass fiber and pure copper fiber respectively,and grey cast iron couple woren at different temperatures were studied by XRD and EDAX.
采用X射线衍射(XRD)和X射线能谱分析(EDAX)对分别使用低炭钢纤维、黄铜纤维和紫铜纤维增强的3种半金属摩擦材料与灰铸铁在不同温度下滑动摩擦形成的磨屑进行分析,并结合扫描电子显微镜(SEM)观察摩擦材料表面形貌,分析材料的磨损特性,并对黄铜纤维和紫铜纤维增强的摩擦材料磨屑成分进行对比分析。
3.
The debris of the composite has also been investigated by the DSC,FT-IR and SEM technique.
用环-块磨损实验机对复合材料进行了磨损试验,用SEM方法对复合材料的磨损表面进行了观察和分析,并利用DSC、FT-IR和SEM分析方法对复合材料的磨屑进行了研究,在上述基础上进行了复合材料的磨损机理探讨。
5) chip
[英][tʃɪp] [美][tʃɪp]
磨屑
1.
Inis necessary to produce efficiently qualified carbide chip with increasing application of cemented carbide tools material,Under conditions of dry and wet grinding,experimental investigation was carride out for plane grinding of YG6 and YT30 re-spectively.
本课题在干磨和湿磨条件下，分别对YG6和YT30进行了平面磨削的实验研究，并利用扫描电镜观察了在不同的磨削条件下，被磨削表面形貌、磨屑及磨削断面结构，在此基础上分析研究了硬质合金磨削过程中的材料去除机理。
6) wear debris
磨屑
1.
Effect of LPS on the osteolysis induced by wear debris in artificial joints;
脂多糖对人工关节磨屑诱导的骨溶解的影响
2.
Experimerntal study of etanercept effects the wear debris-induced osteolysis;
依那西普对磨屑诱导骨溶解影响的实验研究
3.
The wear debris are analyzed by Xray diffraction and worn surfaces by SE.
磨屑的Ｘ射线物相分析结果表明，加Ｎｉ、Ｔｉ的ＳｉＣ陶瓷复合材料与原ＳｉＣ陶瓷材料相比，在高温下的摩擦机制有着本质的不同，从而造成在摩擦学性能上有较大的差异。
补充资料：滴屑屑
1.颤抖貌。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条