1)  adiabvatic operation
绝热操作
2)  heat insulation
绝热
1.
The other is EG-based carbon/carbon low density composite used for heat insulation.
本文介绍了采用此制备工艺的两种膨胀石墨基低密度炭/炭复合材料的一些研究工作:一种材料为以膨胀石墨基炭/炭低密度复合材料活化后制取块状成型活性炭;另一种为利用膨胀石墨基炭/炭低密度复合材料作为绝热材料。
2.
5,under the oxidation of catalyst,the heat insulation synthesis of PFS is realized with the raw Fe 2SO 4·7H 2O,getting rid of the heating equipment and economizing the processing.
5 时,采用工业级硫酸亚铁为原料,在催化氧化作用下,可以实现PFS 的绝热合成工艺,去除加热设备,优化工艺过程。
3.
Numerical simulation results have shown that the new type of bricks can be of both refractory and heat insulation.
根据传热原理,建立了微栅格砌体的传热数学模型,模型计算表明:这种新的砌体可以同时具有很好的绝热性能和耐高温性能。
3)  insulation
绝热
1.
Vacuum insulation panel technology and its development;
真空绝热板(VIP)技术及其发展
2.
With regard to insulation layer and shell anti-corrosion insulation coating for ladle, oxyacetylene flame hot spraying nanometer Al2O3 coating (1), compound reflection insulation plate (2), spreading/putting insulationprotecting coating (3) for the inner surface of ladle shell were studied and developed based on microscale heat transfer.
基于微纳米传热学理论,研制开发了钢包包壳内表面 (1) 氧乙炔火焰热喷涂纳米Al2O3涂层,(2) 复合反射绝热板,(3) 喷/抹涂绝热防护层,取得了钢包外壁温度下降78~140oC以上、减小钢水温降、提高内衬温度等效果。
4)  Thermal insulation
绝热
1.
In this article,the author introduces characteristics and performance index of cellular glass,application,structure and construction method of cellular glass in thermal insulation and sound absorption projects.
阐述泡沫玻璃的特点和性能指标 ,泡沫玻璃在绝热工程和吸声隔声工程中的应用、构造和施工方
5)  prefabricated wrapping
绝热包扎
1.
Based on the problem and objection of bottom cooling waterpipe prefabricated wrapping structure in bar heating furnace of Han steel,the project of technique reformation was put forward and put into practice.
针对邯钢棒材二车间加热炉炉底水管绝热包扎结构存在的问题和缺陷,提出了技术改造方案,并予以实施。
6)  adiabatic temperature
绝热温度
1.
Calculation of adiabatic temperature and study on knietics of preparation of amorphous boron powder by heating reduction with magnesium;
镁热还原法制备无定形硼粉绝热温度的计算与动力学研究
2.
A programm was developed to calculate the adiabatic temperature of NiTi reaction,and the relation between adiabatic temperature and NiTi content,preheating temperature.
根据热力学原理编程计算了NiTi反应时的绝热温度及其与稀释剂w(NiTi)含量和预热温度的关系。
3.
The adiabatic temperature(Tad) and reaction heat per unit mass in NH4VO3-TiO2-Cr2O3-Ni-Al reaction system was calculated to be 1 889.
计算知NH4VO3-TiO2-Cr2O3-Ni-Al反应体系的绝热温度(Tad)为1 889。
参考词条
补充资料:大气非绝热过程


大气非绝热过程
atmospheric diabatic process

  daq一fe一Juere guoeheng大气非绝热过程(atmospherie diabatieprocess)气块通过分子传导、对流、乱流、相变(蒸发、凝结、融解、冻结、升华、凝华)、辐射等作用而与外界发生热交换的过程。空气是热的不良导体,以分子传导方式传递的热量一般很少,除在贴近地面几厘米范围内外,一般不予考虑。对流热传输是对流层内热量传输的重要方式。空气的强迫对流和空气因不稳定而造成的对流,都有把热量沿垂直方向作迅速输送的作用,它们都有使上下位温不同的空气变为位温均匀的效应。乱流热传输是由空气微团的不规则运动所引起的热量输送,其输送热量的效率可达分r热传导的几十万倍,它是摩擦层中热量交换的重要方式之一。大气中的水分发生相变时,有潜热的转变,所以当水汽输送时若伴有相变,则必发生热量交换,通过水的相变,从地面输入大气的潜热量是相当可观的。辐射热传输是指物体以电磁波的形式向外传送或接收能量。空气块本身时刻不停地在放射辐射,同时又能吸收外界给予的辐射。空气直接吸收太阳辐射的能力较差,但善r吸收地面辐射与邻近气层的辐射。近地面层空气受地面辐射的影响最人,辐射热传输的效率可达分子热传导的数千倍。 气块的温度变化,受绝热因子与非绝热因子的共同影响。当气块在近地面层内运动,或以水平运动为仁时,非绝热因子占有重要地位。这表现在气温的日变化及气团的变性中〔、当气块以垂直运动为主时,虽然决定气块温度变化的主要因子是绝热因子。但在气块升、降时,环境空气会卷入气块内部,产生合并与混合过程(称为挟卷过程),使气块成为开放系统。故气块的温度变化,并不严格遵循绝热方程.需作非绝热修正。(曹文俊)
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。