说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 绝热量热
1)  adiabatic calorimetry
绝热量热
1.
The heat capacity measurements of stearic acid(analytic reagent)have been performed using precisely adiabatic calorimetry.
用精密自动绝热量热计测定了分析纯级硬脂酸在 80— 360 K温区的热容 ,获得固液熔化相变的热力学参数 :熔点为 340 。
2.
,were systematically studied, by combining high precision adiabatic calorimetryand modern thermal analytic techniques.
用精密绝热量热方法与现代热分析技术系统地研究了消旋布洛芬、右旋布洛芬、咖啡因、茶碱、氨茶碱、扑热息痛、阿斯匹林等二十八种药物的热力学性质。
2)  adiabatic calorimetry
绝热量热法
1.
The thermodynamic and kinetic parameters are obtained by the means of adiabatic calorimetry to analyze the decomposition of organic peroxides.
利用绝热量热法获得有机过氧化物热力学和动力学参数,分析了它们的分解反应特征,并得出自加速分解温度。
2.
The adiabatic calorimetry is a very simple and precise means to measure the rate of polymerization.
采用绝热量热法研究共聚合动力学 ,在Dewar聚合釜中以 2 ,2′ -偶氮二异庚腈为引发剂进行苯乙烯和甲基丙烯酸甲酯在甲苯溶液中的绝热共聚合试验 ,分别用末端模型与Fuuda和Inagaki的前末端模型拟合交叉链增长焓 。
3.
The kinetics of diallyldimethylammonium chloride aqueous solution polymerization whose kinetic mechanism is very complex and unknown,was investigated in a Dewar-reactor by adiabatic calorimetry by applying ammonium peroxydisulfate of 2, 2′-azobis ( 2-aminopropane ) as initiator.
采用绝热量热法 ,在Dewar聚合釜中研究动力学机理复杂的氯化二烯丙基二甲基铵 (DADMAC)在水溶液中的自由基聚合动力学 ,用数值计算法拟合其动力学和热力学参数 ,计算结果与实验值吻合良好 。
3)  adiabatic calorimeter
绝热量热计
1.
Heat capacities of two kinds of crude oils from Zhongyuan and Shengli Oil Fields and three kinds of mixed oil,prepared by the above two kinds of oil in the ratio of 1∶5,1∶6 and 1∶7,were measured with a precision automatic adiabatic calorimeter in the range 10 70℃.
用精密自动绝热量热计测定了中原、胜利原油以及二者以15、16、17质量比配制成的混合原油在10—70℃温度区间的比热容。
4)  adiabatic calorimeter
绝热量热器
5)  adiabatic calorimeter
绝热热量计
6)  adiabatic modulus
绝热模量
补充资料:差示扫描量热法
分子式:
CAS号:

性质:DSC热分析的一种方法。它是在程序升温的条件下,测量试样与参比物之间的能量差髓温度变化的一种分析方法。差示扫描量热法有补偿式和热流式两种。在差示扫描量热中,为使试样和参比物的温差保持为零在单位时间所必需施加的热量与温度的关系曲线为DSC曲线。曲线的纵轴为单位时间所加热量,横轴为温度或时间。曲线的面积正比于热焓的变化。DSC与DTA原理相同,但性能优于DTA,测定热量比DTA准确,而且分辨率和重现性也比DTA好。它可以用来研究生物膜结构和功能、蛋白质和核酸构象变化等。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条