1) internal pressure cylinder
内压圆筒形容器
2) internal pressure
内压
1.
Factors affecting internal pressure of AA1500 Ni-MH batteries;
AA1500型氢镍电池内压的影响因素
2.
The analyzing of internal pressure effect of hydroforming three-diameter shaft by FEM;
内高压成形三台阶轴过程中内压值影响的有限元分析
3) inner pressure
内压
1.
Fast charging method for decreasing the inner pressure of Ni/MH battery;
降低MH/Ni电池内压的快速充电方法
2.
The influences of the Ni film on the cycle life and inner pressure of the battery were studied.
研究了镀层对MH/Ni电池循环寿命以及充电时内压的影响。
3.
FePc and CoPc were used as cathode additives of Ni-MH battery respectively,and the effects of FePc and CoPc on charge-discharge performance,inner pressure,and cycling performance of Ni-MH battery were studied.
研究2种酞菁类催化剂——酞菁钴、酞菁铁作为负极添加剂对Ni-MH电池充放电、电池内压及循环性能的影响。
4) inner-pressing expansion
内压扩张
5) internal pressure
内压力
1.
Control of axis sealing and internal pressure in tube hydroforming equipment;
圆管液压成形设备中轴向密封力与内压力的控制
2.
To explore the influence of maximal internal pressure on forming tri-branch tube,the procedure of forming tri-branch tube is simulated by FEM software MSC.
给出了不同最大内压力下零件的壁厚分布规律,并就最大压力对成形的影响进行了讨论。
3.
Based on the diffusion instability and plasticity theory,the distribution rules of the internal pressure were indicated and the relationship between the internal pressure and the axial loading were obtained with axial symmetrical part.
利用粘性介质传压,对薄壁管轴压胀形进行了研究;基于塑性理论和分散性失稳理论,推导了轴对称胀形内压力分布规律,得出了内压加载区间和轴向加载关系;建立了基于载荷控制的加载函数,提出了送料控制方法,优化了加载模式;基于集中性失稳理论,计算了胀形压力极限,建立了均匀变形极限和极限应力比的概念,形成了零件可成形性的基本判据;分析了管材成形过程中应力变化特点,揭示了管材胀形区由拉-压应力状态迅速发展到双向受拉的机理。
6) hole pressure
井内压力
参考词条
补充资料：电容分压器(见分压器)
电容分压器(见分压器)
capacitor voltage dividers
d)onf。日g无en丫oq{电容分压器(eaPaeitor voltage dividers)见分压器。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。