1) compressing and bending stress
压弯应力
2) bending stress
弯曲应力
1.
Finite element analysis on the bending stress for roller spur bevel gear based on ANSYS;
基于ANSYS的滚齿直齿圆锥齿轮弯曲应力有限元分析
2.
Analysis of tooth root bending stress for spiral bevel gears;
弧齿锥齿轮齿根弯曲应力分析
3.
Calculation of bending stress of steel-concrete composite beam considering slippage effect;
考虑滑移效应的钢—混凝土组合梁弯曲应力计算
3) bend stress
弯曲应力
1.
The article anaylses the skew arch roofing s bend stress under symmetry and unsymmetrical loads,calculates the skew arch roofing critical load under the symmetry and unsymmetrical loads,the result indicates the skew arch roofing s resistance,and stability are sufficient for its use.
分析了在对称和非对称载荷作用下斜拱型屋面弯曲应力,计算了在对称载荷和非对称载荷作用下斜拱型屋面临界载荷。
2.
This paper demonstrate the way how to measure and control D max -D min of the pressure cylinder for its safe working,which is started with the circular additional bend stress which is caused by the non circularity of the pressure cylinder,then it points out a new method of controlling strength of the pressure cylinder.
从压力容器不圆度引起周向附加弯曲应力出发 ,推导出检测和控制不圆度值的方法 ,使其达到其安全工作的目的 ,为工业生产及检测部门提供依
3.
This paper points out a proplem in《Mechanial Design of Forestry Engirieer-ing》Writted by Fu Wenfan that formula in calculating the bend stress of the hook.
本文指出了傅文范等著《森林工程机械设计》（绞盘机）中涉及到的关于吊钩钩身弯曲应力公式存在的问题，并根据有关理论，提出比较符合实际的计算吊钩钩身弯曲应力的公式。
4) dynamic bending stress
动弯应力
1.
Through modifying the velocity and the lateral force coefficients, the quasi-static calculation method for the dynamic bending stress of rail splices for frozen joint is proposed based on the calculation method for the dynamic bending stress of r.
将鱼尾板简化为“铰＋扭转弹簧”结构，建立了鱼尾板静弯矩的简化算法，与较为准确的双层叠合梁方法相比，误差约为±１０％比照钢轨动弯应力算法，对其中的速度系数和横向水平力系数进行了适当修正，建立了鱼尾板动弯应力准静态算法，并与现场实测数据进行了对比，验证了算法的实用性。
5) tensile stress
弯拉应力
1.
The regression mathematical model of tensile stress in the middle layer of the three-layer flexible pavement is basedon the analysis of elastic multilayer thery.
在分析了三层连续体系中层弯拉应力的解析解及常见路面结构厚度和模量范围的基础上，改进了文献［２］提出的简式公式，提出了一个计算三层连续体系中层弯拉应力的统一公式，并扩大了公式的使用范围；精度分析表明，回归公式的精度明显优于现行的查图法，与解析解相比误差也很小。
2.
The regression mathematical model of tensile stress in the middle layer of the three-layerpavement is modified.
在笔者已有工作的基础上，对常见路面结构的弯拉应力作了大量的计算和分析，修改了柔性路面中层弯拉应力回归逼近的数学模型。
3.
The regression mathematical model of tensile stress in the middle layer of the three-layer flexible pavement is based on the analysis of elastic multilayer theory.
在分析了三层连续体系中层弯拉应力的解析解和常见路面结构层厚度和模量范围的基础上,建立了三层连续体系中弯拉应力显式计算;合理选用分段回归技术,成功地求得了常见路面结构弯拉应力的回归公式;精度分析表明,回归公式精度明显优于现行的查图法,与解析解相比误差也很小。
6) bending stresses
弯曲应力
1.
Software Development on Finite Element Analysis for Bending Stresses of Transmission Gears;
变速器齿轮弯曲应力分析有限元软件的开发
2.
It has been shown that bending stresses that inadvertently occur due to misalignment between the applied force and the specimen axes during the application of tensile and compressive forces can affect the test results.
在材料拉伸和压缩试验期间,由于加力轴线与试样轴线不同轴产生弯曲应力,影响试验结果。
补充资料：长春冷弯型钢总厂生产的异形冷弯型钢
长春冷弯型钢总厂生产的异形冷弯型钢
长春冷弯型钢总厂生产的异形冷弯型钢
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条