1) compression-bending capacity
压弯承载力
1.
Meanwhile the effectiveness of the formulation of compression-bending capacity of high strength CFST columns is studied and analyzed.
本文对钢管高强混凝土柱进行低周反复水平荷载作用的试验,得到了不同轴压比情况下的滞回曲线及骨架曲线,讨论了钢管高强混凝土柱压弯承载力计算公式的适用性。
2.
Tests of five double high strength concrete filled steel tube(CFST) columns under constant axial compression and low-period alternating horizontal loads are carried out to study the seismic behaviors of double high strength CFST columns and usability of formulation of compression-bending capacity.
通过5根双钢管高强混凝土柱承受轴力和低周反复水平荷载作用试验,研究了双钢管高强混凝土柱的抗震性能,讨论了该柱压弯承载力计算公式的适用性。
2) stability bearing capacity of beam-column
压弯稳定承载力
3) flexural capacity
抗弯承载力
1.
Calculation of flexural capacity for timber beams reinforced with CFRP sheets;
碳纤维布加固木梁正截面抗弯承载力的计算
2.
Calculation of flexural capacity for concrete beams reinforced with prestressed CFRP sheets;
预应力碳纤维布加固混凝土梁的抗弯承载力计算
3.
Research on calculation method of flexural capacity of the hybrid reinforced concrete beams;
混杂配筋混凝土梁抗弯承载力计算方法初探
4) flexural strength
受弯承载力
1.
Calculations of flexural strengths for reinforced concrete beams repaired with CFRP;
碳纤维布加固钢筋混凝土梁的受弯承载力计算
2.
Based on tests,the analysis of flexural strength and stiffness of RC beams strengthened with prestressed aramid fiber reinforced polymer(AFRP) sheets with permanent anchor is carried out.
本文在试验研究的基础上,对带永久锚具的预应力芳纶纤维布加固混凝土梁的受弯承载力和刚度进行了分析,建立了其计算公式,给出了不同受力阶段的挠度计算方法。
3.
Further the design procedure is put forward for enhancing flexural strength of RC members by externally bonding prestressed FRP Laminates.
基于已有的试验结果,根据不同情况下的破坏型态,推导了外贴预应力FRP片材的RC梁截面受弯承载力公式,其计算结果与试验值吻合较好。
5) flexural bearing capacity
受弯承载力
1.
A review of flexural bearing capacity of prestressed FRP bars concrete beams;
预应力FRP筋混凝士梁受弯承载力研究综述
2.
On the basis of the deduced formulas to calculate flexural bearing capacity of normal sections for p.
在推导出预应力混凝土梁正截面受弯承载力计算公式的基础上,阐述了预应力混凝土结构设计软件PREC中预应力梁正截面受弯承载力计算的程序实现。
3.
The test results showed that the carbon fiber sheets reinforcement could highly increase the flexural bearing capacity of the concrete beams.
同时对试验结果进行了分析,提出了碳纤维布加固钢筋混凝土梁正截面受弯承载力影响因素及新的计算方法,便于实际工程使用。
6) flexural strength
抗弯承载力
1.
Based on the different failure modes of RC members strengthened with high strength wire mesh and polymer mortar,a practical calculating method for flexural strength of RC members strengthened is put forward.
根据高强钢绞线网—聚合物砂浆抗弯加固的不同破坏模式,提出了钢绞线网—聚合物砂浆抗弯加固的抗弯承载力计算方法,并给出了工程实用的计算方法。
2.
This paper presents a calculation method of flexural strength about reinforced concrete(RC) beams strengthened with carbon fiber reinforced polymer laminate.
提出了一种关于碳纤维片材加固钢筋混凝土梁的抗弯承载力计算方法,其中碳纤维加固梁的应用前提和使用阶段加固梁的验算公式是对现行规范的一种补充和完善,并提出了有待进一步研究的问题。
3.
Formulas for calculating the flexural strength of the beams are developed.
采用数值分析方法对FRP约束混凝土纯弯构件的荷载 -变形关系进行全过程分析 ,理论计算结果与实验结果吻合良好 ,在此基础上 ,本文推导了FRP约束混凝土构件抗弯承载力简化计算公式 ,公式形式简单 ,概念明确 ,便于实际应用。
补充资料：无弹性架压磁测力传感器压头
无弹性架压磁测力传感器压头
无弹性架压碰测力传感器压头
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条