1) shock-induced thermal softening
冲击热软化
2) soft impact
软冲击
1.
The impact load was divided into soft impact and hard impact.
将冲击荷载分为软冲击和硬冲击,以受到软冲击作用的结构为研究对象,建立韧性设计方法的流程图。
3) thermal shock
热冲击
1.
Growth behavior of IMC at SnAgCu(SnPb)/Ni and SnAgCu(SnPb)/Cu interface during thermal shock;
SnAgCu(SnPb)/Ni和SnAgCu(SnPb)/Cu界面金属间化合物在热冲击过程中的生长规律
2.
Numerical simulation of thermal shock damage behavior of TiC_p/W composites;
TiC_p/W复合材料热冲击损伤行为的数值模拟
3.
The Two-dimensional Computaions With FEM on The Transient Temperature Fields Caused By Thermal Shock;
二维热冲击瞬态温度场的有限元计算
4) Thermal impact
热冲击
1.
A quick comparative test approach for the property in withstanding thermal impact of metal material is put forward.
基于加速寿命试验原理,提出了一种简捷、实用的金属材料抗热冲击性能的快速对比试验方法。
2.
By using LSDYNA as a solver, the simulation of the dynamic response of short cylindrical shell under thermal impact was carried out on HPC360.
利用LS DYNA作为求解器在HP C360工作站上完成了轴对称圆柱壳受高速热冲击作用的计算机模拟,得到了位移时程曲线和单元的应力时程曲线,并与已有的结果进行了比较,还得到了在不同边界条件下线热膨胀系数、热传导系数以及比热容对位移和应力的影响。
5) thermal shock resistance
抗热冲击
1.
The close-knit interface and full structure of Ti/Al_2O_3 functionally graded materials(FGM) were obtained by hot pressing sintering method,its thermal shock resistance was studied under the temperature difference 1?000?℃ and 600?℃.
采用热压烧结(HP)技术制备了界面结合紧密、结构完整的Ti/Al2O3梯度功能材料,并分别在1 000℃、600℃温差下对其抗热冲击及抗热疲劳性能进行了研究。
6) heat shock
热冲击
1.
Effects of constant temperature and heat shock on trehalose metabolism of Candida krusei were studied.
研究了恒温条件和热冲击条件对克鲁氏假丝酵母海藻糖代谢的影响。
2.
Numerical examples of heat shock problem of square plate with heat insulation and simplysuppored boundary show that the method is successf.
周边绝热简支方板的热冲击问题算例说明方法是成功的。
3.
The calculation results show that after the heat shock of high .
利用该解析解进行计算,结果表明,热冲击在瞬时完成后,温度场的作用范围仅限于距离炮孔内表面几毫米到几十毫米的薄层中,随时间的增加,温度分布趋于均匀。
补充资料：标准操作冲击电压波形(见冲击电压发生器)
标准操作冲击电压波形(见冲击电压发生器)
standard switching impulse voltage waveform
b .oozhun CooZuo ChongJld，onyo boxlng标准操作冲击电压波形(standard switchingimpulse voltage waveform)见冲击电压发生器。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条