1) CO 2 gas shielded Yu Shengfu
CO2保护
2) CO2 gas-shielded
CO2气保护
3) CO2 protective welding
CO2保护焊
1.
According to sorts of defects happened when CO2 protective welding technology is used,with our company research and experience of body welding,this essay introduced some issuse which need to be paid attention to while CO2 welding technology is used which will play an instruction role in CO2 peotective welding process and operation.
根据CO2保护焊在应用过程中出现各种缺陷,结合在车身焊接应用中的长期研究和经验,介绍了CO2焊接技术应用过程及需注意的一些问题,对CO2气保焊焊接工艺及操作具有一定的参考作用。
4) CO 2 arc welding
CO2气体保护
5) CO_2 arc welding
CO2气体保护焊
1.
The effects of unbalance factor B controlled by nitride forming elements Al,Ti etc on the impact toghness of weld metal by CO_2 arc welding with flux cored wire were studied.
研究了由氮化物形成元素Al,Ti等控制的不平衡因子B对低合金药芯焊丝CO2气体保护焊缝金属韧度的作用。
2.
The short circuiting transfer pulses in the CO_2 arc welding have a great interference to the signals processing of the arc sensor.
CO2气体保护焊的短路过渡脉冲对电弧传感器信号处理存在较大的干扰。
3.
The influence of activating flux on appearance of welds and spatter in CO_2 arc welding with self-made activating welding rod was investigated.
使用自制的活性焊丝,研究了活性剂对CO2气体保护焊焊缝成形及飞溅的影响。
6) CO2 gas shielded arc welding
CO2气体保护焊
1.
Combining with the!common types of welding in the ship-repairing enterprises,the author compared the CO2 gas shielded arc welding with the manual arc welding by practical examples to expound the welding technology of CO2 gas shielded arc welding.
通过CO2气体保护焊和焊条电弧焊的实例对比,结合船舶修造企业中常见的焊接接头类型,阐述了CO2气体保护焊的焊接工艺。
2.
It introduces the droplet transition format of the CO2 gas shielded arc welding,discusses the reasons principle of generating sputtering,and brings forward different sputtering control measures by the different reasons of sputtering in the different droplet transition format,which will solve the sputtering problem in the CO2 welding and generalize this technology.
详细地介绍了CO2气体保护焊的熔滴过渡形式,探讨了飞溅产生的原因机理,根据不同熔滴过渡形式下飞溅的成因提出了不同的飞溅控制措施,以解决CO2焊的飞溅问题,从而推广CO2气体保护焊接工艺。
3.
CO2 gas shielded arc welding is widely used in production,but the spatter produced in the weld process badly affects the quality of weld.
CO2气体保护焊是广泛应用在生产中的焊接方法,但因为焊接时飞溅过大影响了焊接质量。
补充资料：poly(bisphenol a-co-4-nitrophthalic anhy-dride-co
CAS：61128-46-9
分子式：(C31H20O8·C6H8N2)x
中文名称：5,5'-[(1-甲基亚乙基)双(4,1-亚苯氧基)]双-1,3-异苯并呋喃二酮与1,3-亚苯二胺的聚合物
英文名称：1,3-Isobenzofurandione, 5,5'-[(1-methylethylidene)bis(4,1-phenyleneoxy)]bis-, polymer with 1,3-benzenediamine
3-isobenzofurandione, 5,5'-[(1-methylethylidene)bis(4,1-phenyleneoxy)]bis- polymer with 1,3-benzenediamine
poly(bisphenol a-co-4-nitrophthalic anhy-dride-co
1,3-Isobenzofurandione,5,5'-[(1-methylethylidene)bis(4,1-phenyleneoxy)]bis-,polymer with 1,3-benzenediamine
分子式：(C31H20O8·C6H8N2)x
中文名称：5,5'-[(1-甲基亚乙基)双(4,1-亚苯氧基)]双-1,3-异苯并呋喃二酮与1,3-亚苯二胺的聚合物
英文名称：1,3-Isobenzofurandione, 5,5'-[(1-methylethylidene)bis(4,1-phenyleneoxy)]bis-, polymer with 1,3-benzenediamine
3-isobenzofurandione, 5,5'-[(1-methylethylidene)bis(4,1-phenyleneoxy)]bis- polymer with 1,3-benzenediamine
poly(bisphenol a-co-4-nitrophthalic anhy-dride-co
1,3-Isobenzofurandione,5,5'-[(1-methylethylidene)bis(4,1-phenyleneoxy)]bis-,polymer with 1,3-benzenediamine
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条