1) refrigerator inner shell
箱内壳
1.
The structure characteristics of the refrigerator inner shell product and the important action of the mould in the refrigerator production were introduced.
介绍了冰箱内壳产品的结构特点及模具在冰箱生产中的重要作用 ,相应的气缸铰链式真空成型模具内抽芯机构的设计 ,气缸、铰链的选择计算 ,机构的工作过程 ,以及真空成型模具设计中的通用技术要求 ,双模设计中模体位置的布置 ,模具中活块与模体间隙的选择等。
2) ice box inner casing
箱体内壳
1.
Defects like local deformation in an ice box inner casing during foaming process may occur due to decrease of plate thickness;and the main factors were found to be the accurate degree of fitting between the foam mould and the box inner casing.
针对板材厚度降低导致发泡过程中箱体内壳局部变形等质量缺陷,发泡模与箱体内壳的配合准确程度是主要因素。
3) inner shell of refrigerator door
冰箱门内壳
1.
This paper introduced the compression mould design for inner shell of refrigerator door.
介绍了冰箱门内壳吸塑模的设计 ,包括各成型关键零件的材料选择、技术要求、尺寸计算及模具内抽芯机构的设计与调
4) inner hull
内壳内壳
5) inner shell
内壳
1.
Research on the technology of vacuum forming inner shell to the whole door;
一体门内壳真空成形工艺研究
2.
The distinctions of vibration and sound radiation characteristics of the inner and outer shells with three connected types of shells(without connected component,splint connected and annular plate connected) are compared using analytic method,and the revised value of sound-vibration characteristics of the double cylindrical shells is resolved based on the inner shell.
用解析法研究了三种壳间连接形式(无连接构件、托板或实肋板连接)的双层圆柱壳的内、外壳振动和声辐射性能的差别,并求出了以内壳为基准的双层壳声振性能的修正值。
6) bottom shells of gasoline tanks
油箱底壳
补充资料：ANSYS壳单元分析箱梁
! Analysis a box beam section with shell elements of ANSYS
! 用ansys的壳体单元分析箱梁
! Box dimension: 10*4*4m with shell thickness of 0.04m
! By Lu Xinzheng, Depart. Civil Engineering, Tsinghua University, Beijing
! 陆新征，清华大学土木系
! Aug. 2004
! Define the Element
! 定义单元
/PREP7
!*
ET,1,SHELL93
!*
! Define the section for shells
! 定义壳单元截面
R,1,.04, , , , , ,
!*
! Define the material
! 定义材料
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,200e9
MPDATA,PRXY,1,,.3
! Setup the model
! 建模
! Define the keypoints
! 定义关键点
k,1,0,0,0
k,2,4,0,0
k,3,4,4,0
k,4,0,4,0
! Define the lines
! 定义线
l,1,2
l,2,3
l,3,4
l,4,1
! Define the section area
! 定义截面
a,1,2,3,4
! 用ansys的壳体单元分析箱梁
! Box dimension: 10*4*4m with shell thickness of 0.04m
! By Lu Xinzheng, Depart. Civil Engineering, Tsinghua University, Beijing
! 陆新征，清华大学土木系
! Aug. 2004
! Define the Element
! 定义单元
/PREP7
!*
ET,1,SHELL93
!*
! Define the section for shells
! 定义壳单元截面
R,1,.04, , , , , ,
!*
! Define the material
! 定义材料
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,200e9
MPDATA,PRXY,1,,.3
! Setup the model
! 建模
! Define the keypoints
! 定义关键点
k,1,0,0,0
k,2,4,0,0
k,3,4,4,0
k,4,0,4,0
! Define the lines
! 定义线
l,1,2
l,2,3
l,3,4
l,4,1
! Define the section area
! 定义截面
a,1,2,3,4
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条