1) Si 3N 4/BN laminated ceramics
Si3N4/BN层状陶瓷
2) ceramic coat of Si_3N_4-BN
Si3N4-BN陶瓷薄膜
3) Si 3 N 4 /BNmultilayer materials
Si3N4/BN层状材料
4) h-BN/Si3N4 ceramic composite
h-BN/Si3N4陶瓷复合材料
1.
The effects of h-BN content on the fracture behavior and toughness of the h-BN/Si3N4 ceramic composites were investigated.
以亚微米级α-Si3N4和h-BN粉末为原料,Y2O3-Al2O3为助烧剂,采用热压烧结制备了h-BN/Si3N4陶瓷复合材料。
5) Si3N4 ceramic
Si3N4陶瓷
1.
Si3N4 ceramic is brazed with Ti40Zr25Ni15Cu20 amorphous filler metal,the effect of brazing processing parameter on reaction layer products is discussed.
采用Ti40Zr25Ni15Cu20非晶钎料钎焊Si3N4陶瓷,研究了钎焊工艺参数对连接界面产物的影响。
2.
For purposes of meeting these application conditions,the Si3N4 ceramic hybrid ball bearings were developed in this study.
为了满足动量轮对轴承的使用要求,本研究开发了Si3N4陶瓷球混合轴承。
3.
The microstructure and strength of Si3N4 ceramic joint brazed with(Ag72Cu28)96Ti4 rapidly-cooled filler metals were studied.
采用(Ag72Cu28)96Ti4急冷钎料钎焊Si3N4陶瓷,研究联接温度、时间和压力等工艺参数对Si3N4陶瓷的接头界面结构以及强度的影响,并与同成分的常规钎料进行对比。
6) Si_3N_4 ceramic
Si3N4陶瓷
1.
Si_3N_4 ceramic was brazed with Ti40Zr25Ni15Cu20 amorphous filler metal, the effect of brazing processing parameters on interfacial microstructure and joint strength was discussed.
采用Ti40Zr25Ni15Cu20非晶钎料钎焊Si3N4陶瓷,研究钎焊工艺参数对界面反应层和接头连接强度的影响。
2.
Selective laser sintering of coated Si_3N_4 ceramic powders;
将自制共聚物与磷酸二氢铵以适当的比例混合,采用机械混合与喷雾干燥等手段对Si3N4陶瓷粉进行了包覆处理,并在SLS设备上进行了烧结成型实验,成功地实现了包覆粉末的SLS烧结。
补充资料：氮化硅(si_(3)N_(2))基陶瓷制品
氮化硅(si_(3)N_(2))基陶瓷制品
氟化硅(s11N z)基陶瓷制品中国科学院上海硅酸盐研究所供稿
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条