1)  FE
结点重编号法
2)  node
结点
1.
Improved Node Adjustment of Traverses Network;
改进的导线网结点平差法
2.
New algorithm for deleting node from AA-tree;
一种新的删除AA-树结点的算法
3.
Research and Application of Inserted Data Node Algorithm;
插入数据结点算法的研究和应用
3)  joints
结点
1.
The structure of the low chord joints of the main truss is rather complicated.
在建中的京沪高速南京大胜关长江大桥是1座6线铁路三主桁的六跨连续钢桁拱桥,桥面系为道碴整体桥面的多横梁体系,主桁下弦结点的构造很复杂。
2.
The test rerults of ten exterior beams -T column joints on the top floor under monotonous loading are reported.
研究钢筋混凝土框架顶层T形柱梁边结点在单调荷载作用下的受力性能 ,分析框架梁纵筋在结点处的锚固构造及结点的破坏机理和破坏方式 ,根据试验结果提出结点抗剪承载力公式。
4)  nodes
结点
1.
Corresponding relationships between nodes of decomposition tree of wavelet packet and frequency bands of signal subspace;
小波包分解树结点与信号子空间频带的对应关系及其应用
2.
The simplified procedure of steel tube concrete frame based on the uniform theories is introduced, and the dynamic response of the nodes that under the horizon earthquake force is simulated by finite-element software called ANASYS.
根据钢管混凝土统一理论对钢管混凝土框架构件进行简化,利用有限元分析软件ANSYS模拟了其结点处在受到水平地震力的情况下的动力响应。
3.
Therefore,nodes and elements are generated concurrently and automatically by Delaunay triangulation.
首次将Ｄｅｌａｕｎａｙ三角剖分中产生结点和单元两个彼此独立的步骤合二为一，实现了利用Ｄｅｌａｕｎａｙ方法产生有限元网格结点和单元的自动化、一体化。
5)  joint
结点
1.
Stress analysis of springing joint in composite bridge of CFST arch and tied girder;
钢管混凝土拱梁组合桥拱脚结点应力分析
2.
Test of a new type of prestressed joint in underpin;
一种新型预应力托换结点的试验研究
3.
Shear capacity and failure mechanism of steel-high strength concrete joint were analyzed in this paper.
分析了型钢高强混凝土结点的受剪承载力及破坏机理。
6)  knot
结点
1.
Through two typical examples, the paper expoundes and proves the non light′t ness of length between knots in a traverse network and leveling network provided by code for engineering survey, and it is put forward that the improving method.
通过两个示例，论证了工程测量规范中关于导线网和水准网中结点间长度规定的不严密性，并提出了改进方
2.
Firstly, several means, which are classical methods to describe curves and surfaces, are introduced, including the three order spline interpolation method, the Bezier method, the B-spline method and many-knot spline method.
文中首先研究了包括插值三次样条方法，Bézier方法，B样条法和多结点基数型样条法在内的几种典型的曲线曲面造型技术。
参考词条
补充资料：点对点法
分子式：
CAS号：

性质：发射光谱分析中，将金属试样制成两个锥体状电极，分别作为光源的上下电极，彼此相对以电弧或火花法进行激发摄谱。该法因无辅助电极，所摄光谱中可无其伴存谱线。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。