1) cold mixer
冷混机
1.
Introduced the binary plastic cold mixer which can increase cooling efficiency while plastic mixing.
介绍了可提高塑料混合时冷却效率的双工质塑料冷混机,并简要叙述了立式、卧式和立式搅龙双工质冷混机冷却装置冷却物料的工序。
2) hybrid refrigerator
混合式制冷机
3) cold blending
冷混
1.
The blending principles were introduced as well as the process of hot blending and the process of cold blending.
介绍了混料原理和热混、冷混过程,测试了不同热混温度下干混料的表观密度、白度、热稳定性、干流性,采用转矩流变仪测试了干混料的流变性能,采用实验室挤出机制取试样,测试了其色差、拉伸强度、断裂伸长率、简支梁冲击强度、拉伸冲击强度、抗热老化性能等。
4) mixed-refrigerant refrigerator
混合工质节流制冷机
1.
The details of a new cryogenic water-trap for high vacuum applications based on a recuperative mixed-refrigerant refrigerator were disclosed.
该深冷水汽捕集器采用单压缩机驱动的混合工质节流制冷机冷却,制冷系统采用商用单级油润滑压缩机驱动,在配套600L涡轮分子泵时,压缩机的额定输入功率450W,捕集器表面温度最低为110K。
5) Xinfeng-Hunfeng cooler
新风混风冷却机组
1.
Research of Xinfeng-Hunfeng cooler control system;
新风混风冷却机组控制系统的研究
6) low temperature mixed-refrigerant throttle refrigerator
深冷混合工质节流制冷机
补充资料:自动冷镦机、多工位螺栓自动冷镦机
| |||||||
主要参数内容 | 国际先进 | 国内先进 | 国内一般 | 国内落后 | 评定方法及说明 | ||
(一)加工精度 | 参照GB9166-88、JB/T3053-91 | ||||||
1、冲头夹持器模孔中心线对夹持器后支承面的垂直度(mm) 在100长度上 | 0.008 | 0.01 | 0.015 | >0.015 | |||
2、凹模座模孔中心线对凹模后座支承面的垂直度(mm) 在100长度上 | 0.008 | 0.01 | 0.015 | >0.015 | |||
3、冲头夹持器模孔中心线对滑块行程的平行度(mm) 在100行程上 | 0.016 | 0.02 | 0.02 | >0.02 | |||
4、滑块行程对机身上与凹模座贴合的垂直面的垂直度(mm) 在100行程上 | 0.016 | 0.02 | 0.02 | >0.02 | |||
5、工件头部对工件杆部中心线的偏移量(mm) | <0.20 | 0.20~0.25 | 0.25~0.30 | >0.30 | |||
(二)生产率(件/分) | |||||||
20mm | >80 | 70 | 65 | <65 | |||
30mm | >60 | 50 | 45 | <45 |
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条