1) wear-resistant paper
表层耐磨纸
1.
Manufacturing technologies of and market demands for wear-resistant paper on laminated flooring;
表层耐磨纸的生产技术及市场需求
2) top wearing coat
表层耐磨层
1.
Testing results indicated that effects of polymerization degree of PVC resin used for top wearing coat of PVC plastic floor, depth of wearing coat, wear resistance of UV-curing coating coated on the wearing coat and energy of UV-curing process on wear resistance of PVC plastic floor were marked.
试验表明,聚氯乙烯塑料地板表层耐磨层所用聚氯乙烯树脂聚合度、耐磨层厚度、耐磨层涂布之紫外线固化涂料的耐磨性能、紫外线固化能量对塑料地板耐磨性能影响较大,并且从理论上给出了相关解释。
3) abrasion resistant paper
耐磨纸
1.
The quality requirements and production process control of abrasion resistant paper, decorativefilm,backing film and HDF for laminate flooring production are outlined.
介绍强化木地板生产的耐磨纸、装饰纸、平衡纸、高密度纤维板的质量要求和生产工艺控制。
5) Wearable surface
耐磨表面
1.
Wearable surfaces of organisms and application of non -smooth technology in engineering;
生物非光滑耐磨表面与非光滑耐磨技术在工程中的应用
6) wear-resistant coating
耐磨涂层
1.
Organic-inorganic hybrid composites were prepared by the sol-gel method for the wear-resistant coating on epoxide resin and TEOS,KH-560,KH-570 were used as starting materials.
以正硅酸乙脂、KH-560、KH-570为先驱体,采用溶胶-凝胶法结合旋转涂敷法在环氧树脂基体上制备了有机硅耐磨涂层。
2.
25NiCr-75Cr_3C_2 wear-resistant coatings for heavy-duty gas turbine were prepared by HVAF spraying technology,and its bond strength,micro hardness and wear-resistant property were tested,and the bonding mechanism of coatings and the factors affected wear-resistant property of coatings were analyzed.
采用 HVAF 喷涂技术制备重型燃气轮机用25NiCr-75Cr_3C_2耐磨涂层,从结合强度、显微硬度和磨损性能等方面测试涂层性能,探讨了涂层形成的结合机理,分析了影响涂层耐磨性能的因素。
3.
This paper gave an overview of the study situation of plasma-sprayed wear-resistant coating of traditional research at home and abroad,introduced the situation of plasma-sprayed nano-structured coatings and nano-structural application of special performance,but also pointed out the nano-structured coating process problems.
综述了国内外等离子喷涂制备传统耐磨涂层的研究情况,介绍了等离子喷涂制备纳米结构涂层和纳米掺杂微米结构涂层的研究新进展,介绍了纳米结构喂料的制备、纳米结构涂层的特殊性能及应用情况,同时还指出纳米结构涂层制备过程中存在的问题。
补充资料：晒图纸,重氮盐正像晒图纸
分子式：
CAS号：
性质：又称晒图纸，重氮盐正像晒图纸(diazo erect image blueprint paper)或重氮感光纸(diazo sensitized paper)。以蓝图原纸作纸基，再把感光剂涂布于原纸上而制成的一种加工纸。为卷筒纸。原纸要求具有良好的湿抗张强度和吸收性能，湿变形极小，且不含影响感光材料性能的化学药品，通常用棉浆或漂白木浆在造纸机上抄造而成。合格的原纸制成的蓝图纸具有纸面平整、感光层涂布均匀。无白点、斑点、药渍、皱纹等。耐折度不小于33～50次，卷曲度小于15mm。将重氮盐和偶联剂等化学药剂涂布在原纸上加工而成。干法显影用氨气熏蒸，湿法显影则用显影液显影后干燥而成。显像后，图形有蓝色线条、紫色线条或黑色线条的，背底为浅色或白色。用于工程图、文件等的复制。
CAS号：
性质：又称晒图纸，重氮盐正像晒图纸(diazo erect image blueprint paper)或重氮感光纸(diazo sensitized paper)。以蓝图原纸作纸基，再把感光剂涂布于原纸上而制成的一种加工纸。为卷筒纸。原纸要求具有良好的湿抗张强度和吸收性能，湿变形极小，且不含影响感光材料性能的化学药品，通常用棉浆或漂白木浆在造纸机上抄造而成。合格的原纸制成的蓝图纸具有纸面平整、感光层涂布均匀。无白点、斑点、药渍、皱纹等。耐折度不小于33～50次，卷曲度小于15mm。将重氮盐和偶联剂等化学药剂涂布在原纸上加工而成。干法显影用氨气熏蒸，湿法显影则用显影液显影后干燥而成。显像后，图形有蓝色线条、紫色线条或黑色线条的，背底为浅色或白色。用于工程图、文件等的复制。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条