1) wear-resistant chromium
耐磨铬层
2) abrasion resistant coating of Ni-Cr-B-Si
镍铬硼硅耐磨涂层
1.
By using atmospheric plasma spraying method to prepare abrasion resistant coating of Ni-Cr-B-Si,analyze bond strength,metallography,hardness and other properties of the coating,analyze a microstructure after machining,research results show that abrasion resistant coating of Ni-Cr-B-Si can be used for plasma spray process,coating with high hardness and good abrasionproof characteristics.
采用大气等离子喷涂方法制备镍铬硼硅耐磨涂层,对涂层的结合强度、金相组织、硬度等性能进行分析,并对机械加工后的涂层进行了显微组织分析,研究结果表明,镍铬硼硅耐磨涂层可用于等离子喷涂工艺,涂层具有较高的硬度和良好的耐磨性。
2.
Research results show that abrasion resistant coating of Ni-Cr-B-Si with high hardness and good abrasion resistance can be prepared by plasma spray process.
采用大气等离子喷涂方法制备镍铬硼硅耐磨涂层,对涂层的结合强度、硬度等性能进行分析,对机械加工后的涂层进行显微组织分析。
3) wear-resistant coating
耐磨涂层
1.
Organic-inorganic hybrid composites were prepared by the sol-gel method for the wear-resistant coating on epoxide resin and TEOS,KH-560,KH-570 were used as starting materials.
以正硅酸乙脂、KH-560、KH-570为先驱体,采用溶胶-凝胶法结合旋转涂敷法在环氧树脂基体上制备了有机硅耐磨涂层。
2.
25NiCr-75Cr_3C_2 wear-resistant coatings for heavy-duty gas turbine were prepared by HVAF spraying technology,and its bond strength,micro hardness and wear-resistant property were tested,and the bonding mechanism of coatings and the factors affected wear-resistant property of coatings were analyzed.
采用 HVAF 喷涂技术制备重型燃气轮机用25NiCr-75Cr_3C_2耐磨涂层,从结合强度、显微硬度和磨损性能等方面测试涂层性能,探讨了涂层形成的结合机理,分析了影响涂层耐磨性能的因素。
3.
This paper gave an overview of the study situation of plasma-sprayed wear-resistant coating of traditional research at home and abroad,introduced the situation of plasma-sprayed nano-structured coatings and nano-structural application of special performance,but also pointed out the nano-structured coating process problems.
综述了国内外等离子喷涂制备传统耐磨涂层的研究情况,介绍了等离子喷涂制备纳米结构涂层和纳米掺杂微米结构涂层的研究新进展,介绍了纳米结构喂料的制备、纳米结构涂层的特殊性能及应用情况,同时还指出纳米结构涂层制备过程中存在的问题。
4) abrasion-resistant coating
耐磨涂层
1.
Preparation technology of abrasion-resistant coating on optical plastic elements;
光学塑料元件耐磨涂层的制备工艺研究
2.
An abrasion-resistant coating was prepared with organosiloxane on PMMA surface by sol-gel method.
以有机硅氧烷为前驱体,采用溶胶-凝胶法结合流平法在PMMA表面制备有机/无机耐磨涂层,研究热处理温度和时间对涂层的硬度、抗划伤性及耐磨性的影响,利用Taber5151耐磨仪等手段分析表征涂层的性能。
3.
In order to improve the hardness, various methods including abrasion-resistant coating have been demonstrated as an effective and convenient way.
其中,表面涂覆耐磨涂层是一种方便而有效的方法之一。
5) wear resistant coating
耐磨涂层
1.
The Preparation of PMMA Wear Resistant Coating by UV-Light Polymerization and Sol-gel Process;
UV光聚合／溶胶－凝胶法制备有机玻璃耐磨涂层
2.
Aim at the invalidation factors of airflow distribute plate of electric dust collector in agglomeration plant,blaze spraying method was applied to wear resistant coating,by this means,the wear resistant and corrupt resistant performance of airflow distribute plate was improved,and its use life has been prolonged.
针对烧结电除尘气流分布板的失效原因,采用火焰喷涂耐磨涂层的方法,很好地解决了气流分布板磨损和腐蚀问题,实现了该备件的长寿化。
3.
The prime and intermediate coating can prevent substrate from corrosion of oxygen,water and water medium, and the finishing coating is an wear resistant coating.
为了提高在腐蚀与磨损环境下金属机械设备的使用寿命 ,采用胶粘涂层法制备了具有耐冲蚀磨损性能的水力机械胶粘耐磨涂层。
6) wear-resisting layer
耐磨覆层
1.
High-frequency induction heating can be used to obtain a wear-resisting layer on the surface of low-carbon steel.
在Fe基Cr13Ni2B合金粉末中加入适量的焊剂431、硼酐及氟化物,可以有效地去除粉料表面的氧化物,降低其熔点,促进粉料与基体的结合,形成一层脱渣容易、表面成形美观且与基体形成牢固冶金结合的耐磨覆层,覆层厚度可以达到2。
补充资料：耐磨涂层
分子式：
CAS号：
性质：具有高硬度、韧性、润滑并与对磨材料相容等特性的涂层。涂层的抗磨损能力顺序如下：Cr2O3，WC，Al2O3-TiO2，Al2O3，Cr3C2-NiCr。其中氧化铬涂层主要用于石油化工工业的泵柱、磨环、轴套的表面防蚀与抗磨损，解决了输运酸、碱腐蚀液的“跑、冒、滴、漏”问题；Al2O3-TiO2涂层用于化纤工业的罗拉、导丝钩等，不仅抗纤维的摩擦而且抗化纤中氧化钛添加剂的磨损。其他的各类涂层分别应用于航空、机械加工、交通运输、汽车等各个领域，收到了很好的效果。
CAS号：
性质：具有高硬度、韧性、润滑并与对磨材料相容等特性的涂层。涂层的抗磨损能力顺序如下：Cr2O3，WC，Al2O3-TiO2，Al2O3，Cr3C2-NiCr。其中氧化铬涂层主要用于石油化工工业的泵柱、磨环、轴套的表面防蚀与抗磨损，解决了输运酸、碱腐蚀液的“跑、冒、滴、漏”问题；Al2O3-TiO2涂层用于化纤工业的罗拉、导丝钩等，不仅抗纤维的摩擦而且抗化纤中氧化钛添加剂的磨损。其他的各类涂层分别应用于航空、机械加工、交通运输、汽车等各个领域，收到了很好的效果。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条